Auto Mode / Hybrid - Canon PowerShot Elph 340 HS IXUS 265 HS User Manual

8
Choose [Auto] and establish the
connection.
z z
Press the <o><p> buttons to choose
[Auto], and then press the <m> button.
z z
Once the camera is connected to CANON
iMAGE GATEWAY via the access point,
an authentication code is displayed.
9
Enter the authentication code.
z z
On the smartphone or computer, enter
the authentication code displayed on the
camera and go to the next step.
z z
A six-digit confirmation number is
displayed.
10
Check the confirmation
numbers and complete the
setup process.
z z Make sure the confirmation number on
the camera matches the number on the
smartphone or computer.
z z
Press the <q><r> buttons to choose
[OK], and then press the <m> button.
z z
Complete the setup process on the
smartphone or computer.
z z
[ ] (=
GATEWAY are now added as
destinations, and the [
to [ ].
z z
A message is displayed on the
smartphone or computer to indicate that
this process is finished. To add other
Web services, follow the procedure in
"Registering Other Web Services" from
step 2 (=
•
You can connect to WPS-compatible access points by choosing [WPS
Connection] in step 6. For details, see steps 5 – 7 in "Connecting to WPS-
Compatible Access Points" (= 94 – 95).
106) and CANON iMAGE
] icon changes
89).
Before Use Before Use
Basic Guide Basic Guide
Advanced Guide Advanced Guide
Camera Basics Camera Basics

Auto Mode / Hybrid

Auto Mode / Hybrid
Auto Mode Auto Mode
Other Shooting Other Shooting
Modes Modes
P Mode P Mode
Playback Mode Playback Mode
Wi-Fi Functions Wi-Fi Functions
Setting Menu Setting Menu
Accessories Accessories
Appendix Appendix
Index Index
88