VIETA VC-HU710BT User Manual page 23

Bluetooth Audio Streaming A2DP
(Advanced Audio Distribution Profile)
User can listen to music files on an audio device on
this unit if the audio device supports A2DP (Advanced
Audio Distribution Profile) of Bluetooth Technology.
Please read the below instruction before operating
the Bluetooth Audio streaming function on this unit.
Connecting A Bluetooth Audio Device With
This Unit
Before using audio device to play music on this unit,
the audio device must be paired with this unit first.
NOTE:
- For the details operation of Pairing with this unit,
Please refer to the PAIRING operation for more
details.
- How to use the Bluetooth audio device to pair with
this unit, please refer to the instruction manual of the
Bluetooth device.
TIPS:
If the audio device has both HFP(Hands Free Profile)
and A2DP (Advance Audio Distribution Profile), this
unit will automatically pairing these two profiles at the
same time.
Listening To Music From An Audio Device In
This Unit
(1) Connect this unit with the audio device.
NOTE: For the details operation of connecting with
this unit, Please refer to the CONNECTING operation
for more details.
(2) Press SOURCE button repeatedly until "BT
AUDIO" appears on the display.
IMPORTANT: To listen Bluetooth audio streaming
from the audio device, user MUST change the mode
to "BT AUDIO" first. Any other mode of this unit is not
able to activate the Bluetooth audio streaming (A2DP)
function.
NOTE: If the audio device lost the connectivity or no
audio device is connecting with this unit, after mode
changed to BT AUDIO mode, the display will show
"
time out still cannot find any audio device for
connecting, the unit will display "
3 seconds then turn to the Tunner Mode.
(3) Once in the "BT AUDIO" mode, user can use the
audio device to start playback the song via Bluetooth
wireless with this unit.
NOTE: When mode change to BT AUDIO mode,
some of the audio device may auto playback the
music without operate the music playback
operation and some of the device like mobile phone
" , and if after a 30 seconds
may need to first change into the 'Media Player'
mode on the mobile phone otherwise the song
cannot be direct playback via Bluetooth wireless. If
the auto playback not support on the audio device
then please refer to the instruction manual of the
audio device on how to operate music playback via
Bluetooth wireless technology.
Operating an audio device with this unit
AVRCP (Audio Video Remote Control
Profile)
This unit can perform the following operations with
the connecting Audio device whichsupports AVRCP
(Audio Video Remote Control Profile) & only if the
Audio device does support AVRCP.
(1) Start playing - Every time when user change mode
into "BT AUDIO" mode, this unit will automatically
send a "PLAY" command via AVRCP to the audio
device to command the auto start playing song in the
audio device.
NOTE: The PLAY command may differs depending
on the Audio device.
If the Audio device is not able auto start playing song
after changed mode into "BT AUDIO" mode, user
may need to operate the PLAY mode on the audio
device to start the song playback.
(2) Track up / down - by pressing the Track up / down
buttons on this unit.
(3) Pause / Play – by pressing the Pause / Play button
on this unit.
(4) Volume up / down – by rotating the Encoder
Volume Knob on this unit.
(5) Audio Mute – by pressing the Mute button on this
unit.
(6) Stop playback – by mode changing mode into
any other mode of this unit.
NOTE: The AVRCP operation may differ depending
on the audio device, all the other operation other
than those listed above should be performed on the
audio device.
Hands-free Phoning While Bluetooth Audio
Streaming
If the connecting playback audio device is a mobile
phone, all the hands free function is still available
under the Bluetooth audio streaming, like the
" for
answering incoming call, making an outgoing call,
etc.
Disconnecting An Audio Device With This Unit
User can close the Bluetooth Audio connection by
disconnecting with the audio device.
NOTE: The details operation of disconnecting with
this unit, please refer to the DISCONNECTION
operation for more details.
23