The DSL line interface supports • RFC2684 / 1483 to bridge or route traffic over ATM over ADSL various ADSL standards, up to ADSL2+ with X8821r+. At the DTE • Support Networking protocols such as PPP, IP routing, NAPT,...
Version 1.0 X8821r User’s Manual Version 1.0 4. Appearance 3. Packaging This package consists of the following items: Front Panel X8821r ADSL device unit RJ-45 Cable RJ-11 Cable AC Adapter User’s Manual CD 1 2 3 4 5 Label Color...
X8821r and the other end to the ADSL wall outlet. 2. Use a RJ-45 cable to connect one end to the Ethernet port of X8821r, and the other end to the LAN or a PC with an Ethernet adapter installed.
PC. “Telnet” Default Mode: Bridge Login Name: admin X8821r from any workstation in the LAN. The default local Ethernet IP address is “192.168.1.1”. Password: admin Local Ethernet Port (Web Browser) – connect the...
X8821r User’s Manual Version 1.0 X8821r User’s Manual Version 1.0 8. Software Upgrade Chapter 2 You may easily upgrade the embedded software by obtaining the Web Interface Management compressed upgrade kit from the service provider then following the steps: Click on the Local Image Upgrade link to upgrade the software Overview on the modem.
X8821r User’s Manual Version 1.0 X8821r User’s Manual Version 1.0 3. Login 4. HOME The window Enter Network Password will pop up while After logging in, the first tab that will be displayed is the Home starting the configuration. With the window open, type admin for tab.
X8821r User’s Manual Version 1.0 X8821r User’s Manual Version 1.0 However, you must enter the domain name, which is the WAN Interfaces Displays the WAN interface name, SNTP address. encapsulation type, IP address, subnet Date: Enable this check box and select the date from the mask, lower interface, VPI/VCI values, and drop-down list.
X8821r User’s Manual Version 1.0 X8821r User’s Manual Version 1.0 If the PC is USB-enabled, you can connect it directly to the ADSL/Ethernet router collects and consolidates requests device's USB port. Only one computer can be connected in this from the LAN PCs to receive IGMP messages from manner.
X8821r User’s Manual Version 1.0 X8821r User’s Manual Version 1.0 An IP address pool typically includes a range private addresses DHCP Server that you define. LAN administrators often define private IP addresses for use only on their networks. You can also use...
X8821r User’s Manual Version 1.0 X8821r User’s Manual Version 1.0 is connected. See Configuring IP Routes for an explanation 6. WAN of gateway addresses. DNS/SDNS: The IP address of the Domain Name System Click on the WAN tab to view its sub-menu’s and configure the server to be used by computers that receive IP addresses WAN settings.
X8821r User’s Manual Version 1.0 X8821r User’s Manual Version 1.0 a) DSL Parameters Click on the DSL Param button to view the DSL parameters. Another window will then display the DSL parameters, which may be different due to the type and speed of the network.
X8821r User’s Manual Version 1.0 X8821r User’s Manual Version 1.0 Click on the trash can icon to delete the current interface, or edit the current interface by clicking on the pencil icon. Click on the Add button to another interface.
X8821r User’s Manual Version 1.0 X8821r User’s Manual Version 1.0 Click on the trash can icon to delete the current interface, or edit the current interface by clicking on the pencil icon. Click on the Add button to another interface.
X8821r User’s Manual Version 1.0 X8821r User’s Manual Version 1.0 subject to the most restrictive set of firewall protections defined in the software. A private interface connects to your Ethernet over ATM (EoA) LAN, such as the Ethernet interface. Packets received on a...
Page 18
X8821r User’s Manual Version 1.0 X8821r User’s Manual Version 1.0 After you click on the Add button, another window will appear. Lower interface: EoA interfaces are defined in software, and then associated with lower-level software and hardware structures (at the lowest level, they are associated with a physical port - the WAN port).
X8821r User’s Manual Version 1.0 X8821r User’s Manual Version 1.0 IP over ATM (IPoA) Click on the IPoA link to view the IP over ATM configuration table. This table displays IPoA information such as: interface name, interface security type, lower interface, config IP, network IP, subnet mask gateway IP, and status.
X8821r User’s Manual Version 1.0 X8821r User’s Manual Version 1.0 and in-network accesses (such as a company's public Web 7 Bridging server). Packets incoming on a DMZ interface -- whether from a LAN or external source -- are subject to a level of Click on the Bridging tab to view its sub-menu’s and configure the...
X8821r User’s Manual Version 1.0 X8821r User’s Manual Version 1.0 After you click on the Add button, another window will pop-up. 8 Routing Click on the Routing tab to view its sub-menu’s and configure the routing settings. The eight sub-menu’s are: IP route, IP address, LAN Config, DSL, ATM VC, PPP, EoA, and IPoA.
X8821r User’s Manual Version 1.0 X8821r User’s Manual Version 1.0 b) NAT Rule Entry The table displays NAT route configuration. Click on the trash can icon to delete the current rule or click on the Add Click on the NAT link to view the NAT global information table.
X8821r User’s Manual Version 1.0 X8821r User’s Manual Version 1.0 Local Address From/To: Enter the the starting and ending IP addresses of the range of private address you want to be translated. You can specify that data from all LAN...
X8821r User’s Manual Version 1.0 X8821r User’s Manual Version 1.0 RIP Status: Select the Enable or Disable radio button in order to use the protocol. Firewall Age: This s the amount of time in seconds that the device's RIP table will retain each route that it learns from adjacent Click on the Firewall link to view the Firewall Configuration computers.
X8821r User’s Manual Version 1.0 X8821r User’s Manual Version 1.0 sending packets that use the WAN or LAN IP broadcast address as the source address. Land Attack - sending IP Filter packets that use the same address as the source and destination address.
Page 26
X8821r User’s Manual Version 1.0 X8821r User’s Manual Version 1.0 public interface typically connects to the Internet. PPP, When a packet matches a rule, it can either be accepted EoA, and IPoA interfaces are typically public. Packets (forwarded towards its destination), or denied (discarded), received on a public interface are subject to the most depending on the action specified in the rule.
X8821r User’s Manual Version 1.0 X8821r User’s Manual Version 1.0 assign rule IDs in multiples of 5 or 10 (e.g., 1000, 1010, When a PC user types a domain name into a browser, the PC 1020) so that you leave enough room between them for must first send a request to a DNS server to obtain the inserting new rules if necessary.
X8821r User’s Manual Version 1.0 X8821r User’s Manual Version 1.0 RARP: Reverse Address Resolution Protocol. This IP Blocked Protocols protocol provides a way for computers to determine their own IP addresses when they only know their hardware Click on the Blocked Protocols link to view the list of protocols.
X8821r User’s Manual Version 1.0 X8821r User’s Manual Version 1.0 DDNS Click on the DDNS link to configure and add dynamic DNS entries. Dynamic DNS (DDNS) is a service that facilitates outside Internet access to a LAN host even when the host's dynamically-assigned IP address changes frequently.
X8821r User’s Manual Version 1.0 X8821r User’s Manual Version 1.0 is a full DNS solution for newly purchased domains or 10 Admin domains you already own. A web-based interface provides complete control over resource records and your entire Click on the Admin tab to view its sub-menu’s and configure the domain, including support for dynamic IP addresses and admin settings.
X8821r User’s Manual Version 1.0 X8821r User’s Manual Version 1.0 10.2 Commit & Reboot Click on the Commit & Reboot link to view the reboot options. This page is used to save the changes into the device’s memory and reboot the device using different options.
X8821r User’s Manual Version 1.0 X8821r User’s Manual Version 1.0 10.3 Local Image Upgrade 10.4 Remote Image Upgrade Click on the Local Image Upgrade link to upgrade the software Click on the Remote Image Upgrade link to upgrade the on the modem.
X8821r User’s Manual Version 1.0 X8821r User’s Manual Version 1.0 10.6 Diagnostics 10.8 System Log Click on the Diagnostics link to test the device. Results will be Click the System Log link to display the system logs. The displayed as pass, fail, or N.A, depending on your settings.
X8821r User’s Manual Version 1.0 X8821r User’s Manual Version 1.0 10.9 Back/ Restore Config 10.10 Management control Click on the Back/Restore Config link to upload the Click on the Management control link to enable access to configuration data from your PC or download it back to the configuration manager from the WAN port.
Page 35
X8821r User’s Manual Version 1.0 X8821r User’s Manual Version 1.0 When Autodetect is configured in bridging mode, it can detect Privilege levels are defined by the SNMP communities the presence of PPPoE and EoA interfaces on the access configured on the modem. A community is a named group of IP server.
X8821r User’s Manual Version 1.0 X8821r User’s Manual Version 1.0 10.13 Parental Control Chapter 3 Click on the Parental Control link to block Internet access from Quick Protocol Setup specified LAN hosts for specified periods. 1. Overview This chapter provides quick steps on setting up the protocols on this Ensure that either the system time is specified directly or SNTP device.
X8821r User’s Manual Version 1.0 X8821r User’s Manual Version 1.0 3. Another window will then appear. Enter the VPI/VCI values 2. RFC 1483 Bridge (8/81) into the VPI and VCI text boxes. Then click on the Submit button to confirm the changes.
Page 38
X8821r User’s Manual Version 1.0 X8821r User’s Manual Version 1.0 8. Click on the Admin tab to view its sub-menu’s and configure the bridging settings, then click on the Commit & Reboot link 6. Click on the Bridging tab to view its sub-menu’s and configure below it.
X8821r User’s Manual Version 1.0 X8821r User’s Manual Version 1.0 12. Another window will then appear. Enter the VPI/VCI values 3. PPPoE Route Configuration (8/81) into the VPI and VCI text boxes. Then click on the Submit button to confirm the changes.
Page 40
X8821r User’s Manual Version 1.0 X8821r User’s Manual Version 1.0 15. Select an interface name: PPP-1 32. Click on the Admin tab to view its sub-menu’s and configure 16. Select a protocol: PPPoE the bridging settings, then click on the Commit & Reboot link 17.
X8821r User’s Manual Version 1.0 X8821r User’s Manual Version 1.0 36. Another window will then appear. Enter the VPI/VCI values (8/81) into the VPI and VCI text boxes. Then click on the 4. RFC 1483 + NAT Submit button to confirm the changes.
Page 42
X8821r User’s Manual Version 1.0 X8821r User’s Manual Version 1.0 40. Click on the Services tab to view its sub-menu’s and configure the NAT settings, then click on the NAT link below it. 41. Select NAT Rule Entry from the NAT configuration drop down list.
X8821r User’s Manual Version 1.0 X8821r User’s Manual Version 1.0 5. PPPoA Route Configuration 55. Click on the PPP link in the Routing tab, and then click on the Add button to add a PPPoA configuration. Configuration Table: Protocol PPPoA Route Mode.
Page 44
X8821r User’s Manual Version 1.0 X8821r User’s Manual Version 1.0 74. Select the Reboot from last configuration option from the drop down list, and the click on the Commit and Reboot 64. Select NAT Rule Entry from the NAT configuration drop down list.
X8821r User’s Manual Version 1.0 X8821r User’s Manual Version 1.0 6. IPoA Route Configuration 78. Click on the IPoA link in the Routing tab, and then click on the Add button to add an IPoA configuration. Configuration Table: Protocol IPoA Route Mode LAN IP 192.168.1.xxx...
X8821r User’s Manual Version 1.0 X8821r User’s Manual Version 1.0 96. From the drop down list, select DHCP Server, and click on the Submit button. 7. DHCP Configuration 88. Click on the LAN tab to view its sub-menu’s and configure the LAN settings, then click on the DHCP Mode link below it.
X8821r User’s Manual Version 1.0 X8821r User’s Manual Version 1.0 102. Rule Flavor: Select a Rule flavor from the drop down list 8. NAT Configuration (Basic) 103. Rule ID: Enter a number here 99. Click on the Services tab to view its sub-menu’s and configure 104.
• Support for F5 AIS, RDI, protection against DOS RJ-11 connector and loopback cells attacks, IP spoofing, and Power • Compliance of X8821r: • Payload encapsulation other common types of • AC adapter: Input − RFC2684 / RFC1483, attacks ITU-T G.992.1, G.992.2 and •...
X8821r User’s Manual Version 1.0 X8821r User’s Manual Version 1.0 Appendix B – Warranties B2. Warranty Repair B1. Product Warranty 1. During the first three (3) months of ownership, XAVi Technologies will repair or replace a defective product covered under warranty within twenty-four (24) hours of 1.
X8821r User’s Manual Version 1.0 X8821r User’s Manual Version 1.0 Appendix C – Regulations C2. IC CS-03 Notice C1. FCC Part 15 Notice The Industry Canada label identifies certified equipment. This certification means that equipment meets certain telecommunications network protective, operational, and safety...
X8821r User’s Manual Version 1.0 Contact Information You can help us serve you better by sending us your comments and feedback. Listed below are the addresses, telephone and fax numbers of our offices. You can also visit us on the World Wide Web www.xavi.com.tw...