Setting Date, Time And Levels - Healthy Living Deluxe Thinline BT-9000HL Owner's Manual

Setting Date, Time and Levels

Setting date and time
a.
Press "MODE" button ("month" starts flashing)
Press "[ ]" and "[ ]" button to set and adjust the correct month
(1, 2, 3 ....12)
b.
Press "MODE" button again ("date" starts flashing)
Press "[ ]" and "[ ]" button to set and adjust the correct date
c.
Press "MODE" button again ("hour" starts flashing)
Press "[ ]" and "[ ]" button to set and adjust the correct hour in
12-hour format. A "P" will appear for PM and disappear for AM.
d.
Press "MODE" button again ("minute" starts flashing)
Press "[ ]" and "[ ]" button to set and adjust the correct minute
(00, 01, 02 ...59)
After setting the minute you will automatically be prompted to set the per-
sonalized level for Memory Zone 1. The storage of 120 memory readings is
divided into 3 memory zones, each maintaining up to 40 memory readings.
The following explains how to set your personalized level in each zone.
Your personalized level should be decided between you and your
healthcare provider.
Before setting your levels it is important to know:
*Your systolic rate is set between 70 and 250 mmHg.
*Your diastolic rate is set as a minimum of 40 mmHg and a maximum of
minus 5 mmHg of your set systolic rate.
For example
*Preset systolic rate is 140 mmHg; you may set the diastolic rate from
40 to 135 mmHg (140-5=135).
*Preset systolic rate is 160 mmHg; you may set the diastolic rate from
40 to 155 mmHg (160-5=155).
*Preset systolic rate is 200 mmHg; you may set the diastolic rate from
40 to 195 mmHg (200-5=195).
16
Setting Date, Time and Levels
Setting Date, Time and Levels
Setting personalized levels
a. Press "MODE" button
(" - - " will flash for 1st systolic self-management)
Press " " or " " button to set/adjust the person-
alized systolic rate
b. Press "MODE" button
(" - - " will flash for 1st diastolic self-management)
Press " " or " " button to set/adjust the person-
alized diastolic rate
c. Press "MODE" button
(" - - " will flash for 2nd systolic self-management)
Press " " or " " button to set/adjust the person-
alized systolic rate
d. Press "MODE" button
(" - - " will flash for 2nd diastolic self-management)
Press " " or " " button to set/adjust the person-
alized diastolic rate
e. Press "MODE" button
(" - - " will flash for 3rd systolic self-management)
Press " " or " " button to set/adjust the person-
alized systolic rate
f. Press "MODE" button
(" - - " will flash for 3rd diastolic self-management)
Press " " or " " button to set/adjust the person-
alized diastolic rate
The examples to the right illustrate setting personalized levels in all 3
zones.
The monitor is now ready to be used and will automatically default to Zone 1.
17
Setting Date, Time and Levels