Table of Contents
Advertisement
i.
The walls, ceiling, floor, or anything near the UNIT should be constructed of non-combustible
materials.
j.
A portable fire extinguisher should be accessible.
k. Avoid accumulating litter or trash of any sort in or around the UNIT. The floor area surrounding the
UNIT should be kept clean so that metallic filings and powder are not sucked into the unit causing a
short circuit and possible damage to the system.
l.
Personnel who operate or maintain the UNIT should be proficient in normal and emergency
operational procedures. New personnel should be trained and qualified to operate the equipment.
m. Although the UNIT has passed international EMC tests, it is not recommended to install the UNIT near
any equipment that is susceptible to electro-magnetic interference.
n. If long cabling is required, it is preferable to place the UNIT nearer to the source than to the load.
Carefully take off all the packaging material of the converter, and then locate the converter on a site which
has been selected in accordance with all the points in section 3.1.
The converter has passed the production testing and QC, checking all the electrical and mechanical
characteristics in detail prior to shipment from the factory. Therefore the converter should be in proper
condition upon receipt. Once received, check the mechanical structure and see if any physical damage was
made during transportation.
Check if all the accessories / options (matched with your purchase order) have been attached.
DOOR KEY
-
THIS INSTRUCTION MANUAL
-
BATTERY FUSE (FOR OPTIONAL BATTERY CABINET ONLY)
-
SPARE SCREWS FOR COVER PLATE
-
SPARE SCREWS FOR CONNECTION TERMINALS etc.
-
Lastly, check if the specifications of the converter are identical to the specifications you ordered. The key
items in the specifications you must check are:
RATED POWER OF THE CONVERTER
-
INPUT VOLTAGE & FREQUENCY
-
OUTPUT VOLTAGE & FREQUENCY
-
NUMBER OF INPUT PHASES (1 ~ OR 3 ~)
-
NUMBER OF OUTPUT PHASES (1 ~ OR 3 ~)
-
BATTERY VOLTAGE OR CELL NUMBER
-
Also check the necessary documentation that is attached:
GUARANTEE CARD
-
8
Advertisement
Table of Contents
