Table of Contents
Advertisement
4.4.
MENU 3 – DATE / TIME
This menu is selected from MENU 2, the PARAMETER SETTING menu.
YEAR/MONTH/DAY/HOUR/MINUTE/DAY OF THE WEEK of the real time clock through this menu. When
this menu is selected, the current value in the real time clock will be displayed. The cursor (? ) can be moved
upward by the UP (?) key, and can be moved downward by the DOWN (?) key, to the item you want to change.
The selection is confirmed by pressing the ENTER (<+ ) key. The values to be entered are numbers, (except
the DAY OF THE WEEK, MON, TUE, etc., are provided for your selection). The values that can be entered are
restricted to certain values, according to which item is being set.
The value can be increased upward by the UP (?) key, and can be decreased downward by the DOWN (?)
key. The value will flash if it is being set. You can continue to push the UP (?) or the DOWN (?) key until the
expected value is displayed.
values in the real time clock are changed according to the values you enter and the real time will continue to
run based on these values.
If 'EXIT' is selected (blinking instead of pointed by cursor), the screen will go back to MENU 2 - the
PARAMETER SETTING menu.
4.5.
MENU 4 – REAL TIME DATA
This menu is selected from MENU 1, the SELECT MENU.
The first item that can be selected is the RECTIFIER DATA display. This will display the
AC input voltage and frequency to the rectifier assembly. This is shown in the RECTIFIER DATA menu below.
The second item that can be selected is the DC DATA display. This will display the internal DC bus
voltage and the Charge Current for the optional battery backup system. This is shown in the DC DATA menu
below.
The third item that can be selected is the OUTPUT DATA display. This will display AC output voltage,
frequency, and the percentage of maximum output current to the load. This is shown in the OUTPUT DATA
menu below.
The fourth item that can be selected is the OTHER DATA display. Currently this will display the internal
heat sink temperature in degrees centigrade. This is shown in the OTHER DATA menu below.
If 'EXIT' is selected (blinking instead of pointed by cursor), the screen will go back to MENU 1 - the
SELECT MENU menu.
<DATE/TIME SETTING>
YEAR = 2003
HOUR(24H) = 14
MONTH = 09
MINUTE = 45
DAY = 25
DAY OF THE WEEK = THU
Again, the selection is confirmed by pressing the ENTER (<+ ) key.
<REAL TIME DATA>
? RECTIFIER DATA
DC DATA
OUTPUT DATA
OTHER DATA
EXIT
15
EXIT
The user can change the
Then the
Advertisement
Table of Contents
