Advertisement
4. On/Off the Unit
On
When the ignition switch is locked in ACC
or ON position, press
button on the
panel to turn on the unit.
Off
After starting the unit, hold
button for 3
seconds or more to turn off the unit.
Access Main Interface
At power on, press back to main interface
button on the panel to switch to main
interface.
select day/
back to
night mode
main menu
Multimedia
radio mode
mode
bluetooth
mode
GPS mode
function
disc reading
setup
mode
time display
08
Volume Adjustment
Press VOL button on the front panel or
remote control to increase/decrease
volume level.
Mute
Press MUTE button on the remote control
or front panel to turn on/off volume output.
On/Off Equal Loudness
Press LOUD button on remote control to
turn on/off equal loudness.
Picture-in-picture Function
Touch PIP icon to enter picture-in-picture
interface. This function means in normal
running status of current mode, you can
start DVD/Bluetooth/Navigation function at
the same time.
11. Other Modes
AUX Input Operation
Put video input plug into AUX video input socket, put audio input plug into AUX audio
input socket.
The unit only provides a video input port and a AUX audio input port group.
CCD System (back rearview mirror)
Click on the main interface
directly into the rear view system.
If your car is equipped with back cameras, please connect "BACK" control cable with
video input port of the camera. When you back your car, the unit shall switch to rearview
mirror mode automatically. (as shown below).
Field Simulation of Reverse
Do not rely entirely on CCD,
please
eyes while you are driving. CCD only assists the drive to park the car. Due to the
limits in CCD range and distance, it may cause traffic accident if the drive
entirely on CCD.
Click
to exit the rear view system.
Back Rearview Image
confirm safety of the environment with naked
release
21
Advertisement
