Subscribe to Our Youtube Channel
Related Manuals for TAG HDIT 2U
Summary of Contents for TAG HDIT 2U
- Page 1 Reference Manual 22355 TAG WAY Dulles, VA 20166-9310 Technical Support: (877) TAG-TECH +1 (703) 406-4516 tag.com...
-
Page 2: Telephone Numbers
Contact Information: ® When servicing the HDIT 2U 1GHZ PIII SERVER, disconnect the unit from the power source, and remove the power cord (See Page 6). All 22 (See Figure 9) screws need to be removed from the Top Access Panel to service the unit. - Page 3 SCSI IDs Table of Contents: The HDIT 2U 1GHZ PIII SERVER is featured with several SCSI devices, each with Features its own unique SCSI ID. The following is a list of all SCSI peripherals and their respec- Front Panel tive SCSI IDs.
- Page 4 115/230VAC power supply, (See Figure 7). The system main power switch is located space is very limited. The HDIT 2U 1GHZ PIII SERVER comes in a variety of configura- just beneath the power supply’s cooling fan. Turn off the main power switch and...
-
Page 5: Rear Panel
The connectors for all of the external peripherals are located on the left side of the rear panel of the HDIT 2U 1GHZ PIII SERVER, (See Figures 5 & 6). Some of the HDIT The HDIT 2U 1GHZ PIII SERVER features 2 switches mounted centrally on the 2U 1GHZ PIII SERVER units come with a external SCSI Out connector. - Page 6 Wide SCSI LVD hard drives, (See Figures 1, 3 & 4). Refer to page 7 for the SCSI IDs. The HDIT 2U 1GHZ PIII SERVER is equipped with a SCSI CD-ROM, (See Figure 1). To load a CD, press the CD tray eject button. Place the CD on the CD tray, and press NOTE: If you are unsure of the system configuration, power down the unit the tray eject button again.
Need help?
Do you have a question about the HDIT 2U and is the answer not in the manual?
Questions and answers