Advertisement
HIGH LEVEL Input Jacks
for Speaker-Level Outputs
LOW PASS
SUBWOOFER BASS
BOOST +12dB Bass
Enhancer
Power Indicator
GND Ground Terminal
• does not interfere with the operation of
the vehicle
• is not directly in front of a heating vent
• allows drilling of mounting holes without
damaging other vehicle components
• allows convenient and safe routing of
wires
Connecting Input/Output
Note: Be sure to correctly match the input and
output connections (left output to left input,
and right output to right input).
1. Disconnect the negative (–) cable from
your vehicle's battery. This reduces the
possibility of damage to your crossover or
autosound system during installation.
REMOTE Terminal
B+12V Power Terminal
Note: After you complete the connections
and reconnect the battery cable, you
must reset all clock/memory devices in
your vehicle.
2. Connect your autosound system's L (left)
and R (right) outputs to the crossover's
(left) and
R
over has both speaker-level and line-level
inputs. Use either the
HIGH LEVEL
• If your autosound system has line-
level outputs, use the two
input jacks.
• If your autosound system does not
have line-level outputs, tap into the
wires for the existing speakers and use
the four
HIGH LEVEL
2
LOW LEVEL Input
Jacks for Line-Level
Outputs
INPUT LEVEL
SUBWOOFER BASS
BOOST Bass Settings
Mounting
Hole
Left and Right
OUTPUT Jacks
(right)
jacks.This cross-
INPUT
LOW LEVEL
input terminals, but not both.
LOW LEVEL
input jacks.
L
or
Advertisement
