Pnp/Pci Configurations - WynMax WMIX-D5256 User Manual

2.7 PnP/PCI Configurations

Init Display First
Reset Configuration Data
Resources Controlled By
x
IRQ Resources
PCI/VGA Palette Snoop
** PCI Express relative items **
Maximum Payload Size
↑ ↓ ← → :Move
F5: Previous Values
□ Init Display First
Select initial display by PCI or Onboard
device.
□ Reset Configuration Data
Select Enabled to reset Extended
System Configuration Data (ESCD)
when you exit BIOS setup utility, if you
have installed new add-on card and the
system reconfiguration has caused such
a serious conflict that the OS cannot
boot.
Phoenix – AwardBIOS CMOS Setup Utility
PnP / PCI Configurations
[ Onboard ]
[ Disabled ]
[ Auto (ESCD) ]
[ Disabled ]
[ 128 ]
Enter:Select +/-/PU/PD:Value
F6: Fail-Safe Defaults
Press Enter
F10:Save
□ Resources Controlled By
BIOS can automatically configure all the
boot and Plug and Play compatible
devices.
If you choose Auto, you cannot select
IRQ DMA and memory base address
fields, since BIOS automatically assigns
them.
□ PCI/VGA Palette Snoop
Select PCI/VGA Palette Snoop
Enabled/Disabled.
□ Maximum Payload Size
Set maximum TLP payload size for the
PCI Express devices. The unit is byte.
36
Item Help
Menu Level
ESC:Exit F1: General Help
F7: Optimized Defaults