Table of Contents
Advertisement
□ Boot Up NumLock Status
Select <NumLock> key ON/Off when
system boot up.
□ Gate A20 Option
Select Gate A20 controlled by Keyboard
controller (Normal) or Port 92 (Fast).
□ Typematic Rate Setting
Select "Typematic Rate Setting" Enabled
to set,
Typematic Rate (Chars/Sec): Number of
characters repeated in one second.
Typematic Delay (Msec): When holding
one key, set the time between the first
and second character displayed.
□ Security Option
Select security mode,
Setup: Require password to permit BIOS
setup utility.
System: Require password to permit
boot-up and BIOS setup utility.
□ MPS Version Control For OS
Select MPS (Multiprocessor
Specification) Version 1.4 to added
extended configuration tables to improve
support for multiple PCI bus
configurations and improve future
expandability. It is also required for a
secondary PCI bus to work without the
need for a bridge. Select Version 1.1 for
older Operating Systems.
□ OS Select For DRAM > 64M
Select "OS2" only if you are running
older version of IBM OS/2 Operating
System with greater than 64MB of RAM
on the system. Otherwise select
"Non-OS/2" setting.
□ Report No FDD For WIN 95
If running Windows 95/98 without floppy
diskdrive, select "Enabled" to release
IRQ6. This is required to pass Windows
95/98's SCT test, If select "Disabled",
BIOS will not report missing floppy drive
to Win95/98.
□ Small Logo(EPA) Show
Select EPA (Environmental Protection
Agency) Energy Star logo appears
during the system boot-up process.
23
Advertisement
Table of Contents
