Advertisement
Important health- and security information
If you use this product you should take precautions to avoid damages and legal consequences. Follow precisely all security- and
handling advice and keep it carefully. Pay attention to all warning notices in the manual and on the device. To avoid injury, electric
shock, fire and damages on the device, please pay attention to the following notices.
ELECTRICAL SECURITY
This product is made for operation with power from the Car power supply port. Do never touch inside the female port. Any other
application can be dangerous and can lead to loss of warranty for this product. Do never let the device be plugged in the cigarette
lighter after use. If the female port is not connected to the ignition, there will be danger of discharge of the battery. Protect the
NL- 324BTR against humidity and stay within the limitations of operating and storage temperature (see specification). Replace the
fuse only with the same nominal size (630mA Flink). Do not open or modify the NL-324BTR otherwise the warranty will expire. Inside
there are no parts existing, which could be maintained through the user. Make sure you follow the rules of the respective country
regarding the usage of such devices during the drive.
NOTE. RECYCLE OR DISPOSE THE PRODUCT ACCORDING TO THE APPLICABLE REGULATIONS.
SECURITY ADVICE REGARDING DIRECT SUNLIGHT
Do not expose the NL-324BTR to direct sunlight or heat. Do not cover it. Do not mount it on or near heat sensitive materials.
Damages, which require a repairing
Disconnect in the following cases the device from the grid and contact an authorized repairing specialist or the dealer:
• Liquidity or any item came into the product or an object got into the device.
• The product was exposed to rain or liquidity.
• The product fell down and is damaged.
• There are visible signs of overheating.
• The product does not work properly despite of correct operation.
Avoid using the device after high variation in temperature
If you expose the device to high variation in temperature or humidity, there may be condensation in the device. In order to avoid
damages wait until the humidity is evaporated, before using it.
NOTE: If you bring the device from a cold into a warm or from a warm into a cold environment, let the device take over the
temperature before switching it on.
Advertisement
