Beam Warranty Conditions - Beam RST625 Installation & User Manual

Beam Warranty Conditions

Beam Communications gives this express warranty (along with extended warranty endorsements,
where applicable) in lieu of all other warranties, express or implied, including (without limitation),
warranties of merchantability and fitness for a particular purpose. This constitutes our sole
warranty and obligation with regard to our products as well as the Customer's sole remedy.
Beam Communications expressly disclaims all liability and responsibility for any special, indirect
or consequential damages or any further loss of any kind whatsoever resulting from the use of our
product(s). The Customer's sole and exclusive remedy and the limit of Beam's liability for any loss
whatsoever, shall not exceed the purchase price paid by the Customer for the product to which a
claim is made.
All products manufactured by Beam Communications are warranted to be free from defects in
material and workmanship in accordance with and subject to the following terms and conditions:
1. This warranty is limited to the original Customer only. It cannot be transferred or assigned to
third parties unless the intent to transfer to a third party is expressly indicated in a purchase order
and/or warranty-processing arrangements have been agreed upon in writing by Beam.
2. Beam Communications does not warrant any installation, maintenance or service of the
Products not performed by Beam, nor does it warrant the use of Products with unapproved
ancillary products.
3. Beam Communications will correct any defects in material or workmanship of products
manufactured by Beam which appear within (12) months, from the date of shipment by Beam
Communications to the Customer. Beam Communications will repair or replace, at our option, any
defective product, provided that our analysis and/or inspection discloses that such defects
developed under normal and proper use.
4. This warranty does not extend to goods subjected to liquid or particulate ingress, extreme
humidity, misuse, neglect, accident or improper installation, or to maintenance or repair of
products that have been altered or repaired by anyone except Beam Communications unless
otherwise stated in writing.
5. The warranty is a return-to-base warranty and freight is paid by the sender.
6. A charge of USD150 including return freight will be made for testing returned product which
is not defective or is found to be defective as the result of improper use, maintenance or neglect.
7. Beam Communications will not accept responsibility for any invoiced goods or services that
are not covered by a Beam Communications written purchase order. Under no circumstances
does Beam Communications agree to pay for labour or other related expenses associated with
the troubleshooting and/or repair of our product without prior specific written authorization.
8. Information in our descriptive literature is based on product specifications that are current at
the time of publication. Product specifications, designs and descriptive literature are subject to
change as improvements are introduced. Although we announce changes as they occur, we
cannot guarantee notification to every Customer. Beam Communications warrants delivered
product to conform to the most current specifications, designs and descriptive literature.
9. This warranty policy may be expanded or limited, for particular categories of products or
Customers, by information sheets published as deemed appropriate by Beam Communications. In
particular, the warranty for third party Products is that of the third party and not Beams warranty.
RST625 INSTALLATION & USER MANUAL REV 01
39