FAX....................... 13 5.5. Status Light Indicator ................... 13 CONFIGURATION GUIDE ..................14 6.1. Configuring Unicorn 3112 using Web Browser (Recommended) ....14 6.1.1. Accessing the Web Configuration ............15 6.1.2. Programming Unicorn 3112 via the LAN Port ........15 6.1.3.
Unicorn 3112 is an all-in-one VoIP integrated access device that features superb audio quality, rich functionalities, high level of integration, compactness and ultra-affordability. The Unicorn 3112 is fully compatible with SIP industry standard and can interoperate with many other SIP compliant devices and software on the market.
Unicorn 3112 User Manual Supports call origination and termination from/to the PSTN network(via FXO Port) Powerful digital signal processing (DSP) to ensure superb audio quality; advanced adaptive jitter control and packet loss concealment technology Support various vocoders including G.711 (a-law and u-law), G.723.1 (5.3K/6.3K), G.726 (40K/32K/24K/16K), as well as G.728, G.729A/B, and iLBC(Pending).
Unicorn 3112 User Manual 4. INSTALLATIONS The Unicorn 3112 is an all-in-one VoIP integrated device designed to be a total solution for networks providing VoIP services. The Unicorn 3112 VoIP features are available when you connect any regular analog telephone to it.
Insert a standard RJ11 telephone cable (included with package) into the “Line” port and connect the other end of the telephone cable to a wall jack. Connect a PC to the LAN port of Unicorn 3112 (Ethernet cable is included with package).
Page 7
Unicorn 3112 User Manual Enter 01 – 07,12 - 17, 47, 86 or 99 Menu option “DHCP Mode”, “Static IP Mode” Enter ‘9’ to toggle the selection If user selects “Static IP Mode”, user need configure all the IP address information through menu 02 to 05.
IP address. Once all of the digits are collected, the input will be processed. Incorrect keyed entry cannot be deleted or undone. The Unicorn 3112 will prompt you to start over by telling you that you made an error.
Unicorn 3112 User Manual stutter tone if there is another incoming call. User can press the flash button to put the current call party on hold and switch to the other call. Pressing flash button toggles between two active calls.
Party A can hang Note: When Attended Transfer failed and if party A hangs up, the Unicorn 3112 will ring party A again to remind party A that party B is still on the call, by pressing FLASH or Hook again will restore the conversation between party A and party B.
At this time, users can dial a VoIP telephone number then # (or wait for 4 seconds). The call will be established afterwards. If no VoIP number is entered after the dial tone, Unicorn 3112 will hang up automatically in 10 seconds.
When Unicorn 3112 is out of power or loses registration or if the network connection is down, the RJ 11 line jack on the side of Unicorn 3112 will function as a pass through connection for PSTN calls. Users will be able to use the same analog phone for PSTN calls.
To program Unicorn 3112 via the LAN port, directly connect an Ethernet cable from your PC to the LAN port of the Unicorn 3112. After connecting the cable, confirm that the green light of the LAN port is on. If the green light is not on, this means that your PC is not yet properly connected to the Unicorn 3112 via the LAN port.
Unicorn 3112 User Manual After enabling WAN access, be sure that the WAN port of the Unicorn 3112 is connected to an uplink (i.e. router, hub, switch, etc). Then, get the WAN IP address of the Unicorn 3112 and selecting menu option 02.
End User Password for access to Basic User Options: 1234 6.1.6. End User Settings: After a correct password is entered in the login screen, the embedded web server inside the Unicorn 3112 will show the configuration page, which is explained in details below: 6.1.6.1 Device Status:...
This shows whether the PPPoE is up if connected to DSL PPPoE Link Up modem. This shows what kind NAT the Unicorn 3112 is connected to. It is based on STUN protocol. If the detected NAT is symmetric NAT, STUN will not work and Outbound Proxy needed to make Unicorn 3112 functioning correctly.
Page 19
Unicorn 3112 User Manual - If Static IP mode is selected, the IP address, Subnet Mask, Default Router IP address, DNS Server 1 (mandatory), DNS Server 2 (optional) fields need to be configured. This parameter controls how the displayed date/time will Time Zone be adjusted according to the specified time zone.
Page 20
Configuration Menu. This field is case sensitive. BASIC OPTIONS SETTING Setting Options Meaning If set to “Yes”, the Unicorn 3112 will respond to the PING Reply to ICMP on WAN command from other computers, but it also is vulnerable port to the DOS attack.
Unicorn 3112 User Manual PSTN, no default Calls are unconditionally forwarded to the specified PSTN Unconditional Call phone number once users dial the FXO port VoIP Forward to PSTN number. Calls are unconditionally forwarded to the specified VoIP Unconditional Call...
Page 22
Do not interrupt the firmware upgrading process. This parameter defines the URI or IP address of the NTP NTP Server server which is used by the Unicorn 3112 to display the current date/time. If this parameter is set to “Yes”, the configuration update Lock Keypad Update via keypad is disabled.
Page 23
Unicorn 3112 User Manual • negotiated codec (INFO level) • Ethernet link up (INFO level) • SLIC chip exception (WARNING and ERROR levels) • memory exception (ERROR level) The Syslog uses USER facility. In addition to standard Syslog payload, it contains the following components:...
If activated (by choosing “Yes”) and a STUN server is also specified, then the Unicorn 3112 will behave according to the STUN client specification. Under this mode, the embedded STUN client inside the Unicorn 3112 will attempt to detect if and what type of firewall/NAT it is sitting behind through communication with the specified STUN server.
Page 25
The default value for FXO port is 5062. This parameter defines the local RTP-RTCP port pair the Unicorn 3112 will listen and transmit. It is the base RTP port for channel 0. When configured, channel 0 will use this port _value for RTP and the port_value+1 for its Local RTP port RTCP;...
Page 26
Please note that only the user part of a SIP Offhook Auto-Dial address needs to be entered here. The Unicorn 3112 will automatically append the “@” and the host portion of the corresponding SIP address.
Page 27
Unicorn 3112 User Manual FXS PORT SETTING Setting Options Meaning The Unicorn 3112 supports up to 7 different Vocoder types including G.711 A-/U-law,G.723.1, G.726, G.728, G.729A/B, iLBC(Pending). Depending on the product model, some of these Vocoders may not be provided in standard release.
Page 28
Unicorn 3112 User Manual maximum allowed value, the Unicorn 3112 will use and save the maximum allowed value for the corresponding first vocoder choice. The maximum value for PCM is 10(x10ms) frames; for G726, it is 20 (x10ms) frames; for G723, it is 32 (x30ms) frames;...
Page 29
Unicorn 3112 User Manual FXS PORT SETTING Setting Options Meaning Select either Fixed or Adaptive based on network Jitter Buffer Type conditions. Select Low, Medium or High based on network Jitter Buffer Length conditions. Distinctive Ring Tone Default is NO.
Page 30
Unicorn 3112 User Manual c. ^ - exclude; d. [3-5] - any digit of 3, 4, or 5; e. [147] - any digit 1, 4, or 7; f. <2=011> - replace digit 2 with 011 when dialing Example 1: {[369]11 | 1617xxxxxxx} Allow 311, 611, 911, and any 10 digit numbers of leading digits 1617 Example 2: {^1900x+ | <=1617>xxxxxxx} Block any...
Page 31
Unicorn 3112 User Manual Rejection rejected with busy message. Session Default is 180 seconds. Expiration Min-SE Default is 90 seconds Caller Request Default is NO Timer FXS PORT SETTING Setting Options Meaning Callee Request Default is NO Timer Force Timer...
Page 32
Unicorn 3112 User Manual Broadsoft, etc. Selects the impedance of the analog telephone FXS Impedance connected to the Phone port. Select the Caller ID Scheme to suit the standard of different area. • Bellcore (North America) Caller ID Scheme • ETSI-FSK (France, Germany, Norway, Taiwan, UK-CCA) •...
STUN server. If the detected NAT is a Full Cone, Restricted Cone, or a Port-Restricted Cone, the Unicorn 3112 will attempt to use its mapped public IP address and port in all its SIP and SDP messages. If the NAT Traversal field is set to “Yes”...
Page 34
The default value for FXO port is 5062. This parameter defines the local RTP-RTCP port pair the Unicorn 3112 will listen and transmit. It is the base RTP port for channel 0. When configured, channel 0 will use this port _value for RTP and the port_value+1 Local RTP port for its RTCP;...
Page 35
NAT/Firewall. NAT IP address used in SIP/SDP message. Use NAT IP Default is blank. The Unicorn 3112 supports up to 7 different Vocoder types including G.711 A-/U-law , G.723.1, G.726, G.728, G.729A/B, iLBC(Pending). Depending on the Preferred Vocoder...
Page 36
Unicorn 3112 User Manual message. The first Vocoder in this list can be entered by choosing the appropriate option in “Choice 1”. Similarly, the last Vocoder in this list can be entered by choosing the appropriate option in “Choice 7”.
Page 37
Unicorn 3112 User Manual FXO PORT SETTING Setting Options Meaning iLBC frame size This sets the iLBC size in 20ms or 30ms This defines payload time for iLBC. Default value is 98. iLBC payload type The valid range is between 96 and 127.
Page 38
Unicorn 3112 User Manual be used as the “Send” (or “Dial”) key. If set to “Yes”, pressing this key will immediately trigger the sending of dialed string collected so far. In this case, this key is essentially equivalent to the “(Re)Dial” key. If set to “No”, this “#”...
Unicorn 3112 User Manual Refresher Specify Default is UAC Refresher Force INVITE Default is NO Special Feature Default is standard Caller ID Minimum RX Default is -30dB Level (dB) Caller ID Transport Type Default is Relay via SIP P-Asserted-Identity Voice path volume adjustment.
Please allow 5 to 10 seconds before rebooting the device. 6.1.8. Rebooting the Unicorn 3112 You can reboot the Unicorn 3112 by clicking on the “Reboot” button after each update to the configuration page. Alternatively, you can reboot by unplugging the power supply of the Unicorn 3112 and then powering it on again.
Follow section 5.1 with voice menu option 01 to enable Unicorn 3112 to use DHCP 6.2.2. Static IP Mode Follow section 5.1 with voice menu option 01 to enable Unicorn 3112 to use STATIC IP mode, then use option 02, 03, 04 to set up Unicorn 3112’s IP, Subnet Mask, Gateway respectively.
Unicorn 3112 User Manual point at the IP address of the Unicorn 3112. Input the admin password to enter the configuration screen. From there, enter the TFTP server address in the designated field towards the bottom of the configuration screen.