Configuring Unicorn3101 using Web Browser ........... 13 6.1.1 Accessing the Web Configuration............13 6.1.2 Programming Unicorn 3101 via the LAN Port........13 6.1.3 Programming Unicorn 3101 via the WAN Port ........14 6.1.4 User Programming and Configuration ..........14 6.1.5 Passwords ..................14 6.1.6 Configuration Options and Explanations ..........
Unicorn 3101 is an all-in-one VoIP integrated access device that features superb audio quality, rich functionalities, high level of integration, compactness and ultra-affordability. The Unicorn 3101 is fully compatible with SIP industry standard and can interoperate with many other SIP compliant devices and software on the market.
INSTALLATIONS The Unicorn 3101 is an all-in-one VoIP integrated device designed to be a total solution for networks providing VoIP services. The Unicorn 3101 VoIP features are available when you connect any regular analog telephone to it. Unicorn 3101 has one FXS port (labeled “Phone”) and one PSTN pass through port (labeled “Line”).
Hanlong Technology. BASIC OPERATIONS Get Familiar with Voice Unicorn 3101 has stored a voice prompt menu for quick access to settings and simple configuration. You can enter this voice prompt menu one ways ...
Page 7
Automatically returns to Main Menu Other Menu Prompt Features: Just like pressing “***” on the analog telephone, you will hear “Direct IP Calling”, Hanlong Technology Co., Ltd Unicorn 3101 User Manual Page 7 of 28 Firmware 1.0.0.46 Last Updated 1/19/2012...
IP address. Once all of the digits are collected, the input will be processed. Incorrect keyed entry cannot be deleted or undone. The Unicorn 3101 will prompt you to start over by telling you that you made an error.
“#” key if it is configured as a send key or wait 4 seconds. In this case,the default destination port 5060 is used if no port is specified. Hanlong Technology Co., Ltd Unicorn 3101 User Manual Page 9 of 28 Firmware 1.0.0.46...
INVITE and will try to recover the call. The busy tone is just to indicate to the transferor that the transfer has failed. Busy tone keeps playing. This means the Unicorn 3101 has failed to receive the second NOTIFY signal from the transferee and decided to time out.
Party A can hang Note: When Attended Transfer failed and if party A hangs up, the Unicorn 3101 will ring party A again to remind party A that party B is still on the call, by pressing FLASH or Hook again will restore the conversation between party A and party B.
When Unicorn 3101 is out of power or loses registration or if the network connection is down, the RJ 11 line jack on the side of Unicorn 3101 will function as a pass through connection for PSTN calls. Users will be able to use the same analog phone for PSTN calls.
To program Unicorn 3101 via the LAN port, directly connect an Ethernet cable from your PC to the LAN port of the Unicorn 3101. After connecting the cable, confirm that the green light of the LAN port is on. If the green light is not on, this means that your PC is not yet properly connected to the Unicorn 3101 via the LAN port.
“Enable WAN Web Access” option. After enabling WAN access, be sure that the WAN port of the Unicorn 3101 is connected to an uplink (i.e. router, hub, switch, etc). Then, get the WAN IP address of the Unicorn 3101 by following section 5.1 of this user manual and selecting menu option 02.
• FXS port 6.1.6 Configuration Options and Explanations After a correct password is entered in the login screen, the embedded web server inside the Unicorn 3101 will show the configuration page, which is explained in details below: 6.1.6.1 Device Status DEVICE STATUS...
Page 16
-To use the PPPoE feature, the PPPoE account settings need to be set. The Unicorn 3101 will attempt to establish a PPPoE session if any of the PPPoE fields have been entered with data.
"Data VLAN Tag". STUN server IP address or domain name of stun server. This parameter specifies how often the Unicorn 3101 keep-alive interval sends a blank UDP packet to the SIP server in order to keep the “hole”...
Set another ip address of snmp trap This parameter defines the URI or IP address of the NTP NTP Server server which is used by the Unicorn 3101 to set the current date/time. Allow DHCP Option 42 If set Yes,device can get NTP server from DHCP option...
Page 19
If Choosing No,nothing to do. If Choosing No, but send keep-alive, the Unicorn 3101 will periodically (every 20 seconds or so) send a blank UDP packet (with no payload data) to the SIP server to keep the “hole”...
Page 20
5060. The default value for FXO port is 5062. This parameter defines the local RTP-RTCP port pair the Unicorn 3101 will listen and transmit. It is the base RTP port for channel 0. When configured, channel 0 will...
Page 21
Please note that only the user part of a SIP Offhook Auto-Dial address needs to be entered here. The Unicorn 3101 will automatically append the “@” and the host portion of the corresponding SIP address.
Page 22
Re(Dial) key. If set to No, this “#” key will then be included as part of the dial string to be sent out. Dial Plan Dial Plan Rules: Hanlong Technology Co., Ltd Unicorn 3101 User Manual Page 22 of 28 Firmware 1.0.0.46 Last Updated 1/19/2012...
Page 23
SUBSCRIBE for MWI Message Waiting Indication will be sent periodically. Send Anonymous If this parameter is set to Yes, the “From” header in Hanlong Technology Co., Ltd Unicorn 3101 User Manual Page 23 of 28 Firmware 1.0.0.46 Last Updated 1/19/2012...
Page 24
Session Timer can be refreshed using INVITE method or UPDATE method. Force INVITE Select “Yes” to use INVITE method to refresh the session timer. Hanlong Technology Co., Ltd Unicorn 3101 User Manual Page 24 of 28 Firmware 1.0.0.46 Last Updated 1/19/2012...
6.1.7 Saving the Configuration Changes Once a change is made, users should click on the “SaveSet” button in the Configuration page, as follow: Hanlong Technology Co., Ltd Unicorn 3101 User Manual Page 25 of 28 Firmware 1.0.0.46 Last Updated 1/19/2012...
6.1.8 Rebooting the Unicorn 3101 You can reboot the Unicorn 3101 by clicking on the “Reboot” button after each update to the configuration page. Alternatively, you can reboot by unplugging the power supply of the Unicorn 3101 and then powering it on again. If your Unicorn 3101 ever becomes “stuck”...
To configure the TFTP server via the Web configuration interface, open up your browser to point at the IP address of the Unicorn 3101. Input the admin password to enter the configuration screen. From there, enter the TFTP server address in the designated field towards the bottom of the configuration screen.
Enter “99” and then you will hear the voice prompt “Reset”. c) Enter the number “862584658050”. A "click" sound will be heard. d) Wait for 15 seconds. TECHNICAL SUPPORT CONTACT Email: Support@mail.hanlongtek.com Hanlong Technology Co., Ltd Unicorn 3101 User Manual Page 28 of 28 Firmware 1.0.0.46 Last Updated 1/19/2012...