Canon IXUS 950IS User Manual page 122

Canon ixus 950is digital camera user guide
Table of Contents

Advertisement

Subject in recorded image is too dark.
Insufficient light for
shooting.
The subject is
underexposed because
the surroundings are too
bright.
Subject is too far away
for flash to reach.
Subject in recorded image is too bright, or
image flashes white.
Subject is too close,
making the flash too
strong.
The subject is
overexposed because
the surroundings are too
dark.
Too much light is shining
directly into the camera,
or is being reflected off
the subject.
Flash is set to on.
Image contains noise.
ISO speed is too high.
120
Set the flash to
Guide p. 14).
Set the exposure compensation to a
positive (+) setting
Use AE lock or use the spot metering
function
(pp.
53, 55).
Shoot within correct flash range of
the subject when using the built-in
flash
(p.
139).
Raise the ISO speed and then
shoot
(p.
69).
Shoot within correct flash range of
the subject when using the built-in
flash
(p.
139).
Set the exposure compensation to a
negative (-) setting
Use AE lock or use the spot metering
function
(pp.
53, 55).
Change the shooting angle.
Set the flash to
Guide p. 14).
Higher ISO speeds and the
ISO Auto) setting may increase image
noise. For higher image quality, select
as low an ISO speed as possible
(p.
69).
In
,
,
,
modes, the ISO speed increases
and noise can appear.
(flash on) (Basic
(p.
56).
(p.
56).
(flash off) (Basic
(High
,
,
,
and

Advertisement

Table of Contents
loading

This manual is also suitable for:

Digital ixus 950 is

Table of Contents