Table of Contents
Advertisement
Installing LP Gas Tank
To operate, you will need (1) precision-filled standard grill LP gas
tank (20#) with external valve threads.
W CAUTION: LP gas tank must be properly
disconnected and removed prior to moving this
grill.
Insert and Secure LP Gas Tank
Loosen LP gas tank retainer bolt by turning counter-clockwise.
Place precision will LP gas tank upright into hole in grill body so the tank valve is facing the gas
line connection.
Secure tank by turning LP gas tank retainer bolt clockwise until tight.
Connect LP Gas Tank
Before connecting, be sure that there is no debris caught in
the head of the LP gas tank, head of the regulator valve or
in the head of the burner and burner ports.
Connect regulator/hose assembly to tank by turning knob
clockwise until it stops.
Disconnect LP Gas Tank
Before disconnecting make sure the LP gas tank valve is
"CLOSED."
Disconnect regulator/hose assembly from LP gas tank by
turning knob counterclockwise until it is loose.
W CAUTION: LP gas tank must be properly
disconnected and removed prior to
moving this grill.
Getting More Propane
Need a tank of gas? One option is to try propane exchange. It's easy, fast,
safe, and available at tens of thousands of conveniently located retail
outlets nationwide, which are typically open on nights and weekends. You
can purchase a fresh, precision-filled tank or exchange your empty for a
fresh, precision-filled tank. Another option is to have your tank refilled at a
refill station. Be sure to check the hours of operation for the refill station.
Outdoor LP Gas Barbecue Grill Model No. GBC1362W / BH13-101-099-01
Operating Instructions
Checking for Leaks
20 lb
9 Kg
Burner Connections
1.
Make sure the regulator valve and hose
connections are securely fastened to the burner
12.2 in. / 31 cm
and the tank.
Visually check the connection between the burner
venturi pipe and orifice. Make sure the burner
venturi pipe fits over the orifice.
W WARNING: Failure to inspect this
connection or follow these instructions
could cause a fire or an explosion
which can cause death, serious bodily
injury or damage to property.
2.
Please refer to diagram for proper installation
(Figures 1 and 2).
3.
If the burner pipe does not rest flush to the orifice,
please contact 1.800.762.1142 for assistance.
Tank/Gas Line Connection
1.
Make 2-3 oz. of leak solution by mixing one part
liquid dishwashing soap with three parts water.
2.
Make sure control knobs are " OFF" position
(Figure 3).
3.
Connect LP gas tank per "Installing LP Gas Tank"
section.
4.
Turn LP gas tank valve to "OPEN."
5.
Spoon leak check solution at all "X" locations
(Figures 1, 2 and 4).
a.
If any bubbles appear, turn LP gas tank valve
to "CLOSED", reconnect and re-test.
b.
If you continue to see bubbles after
several attempts, turn LP gas tank valve to
"CLOSED" and disconnect LP gas tank, per
"Disconnect LP Gas Tank" instructions, and
contact 1.800.762.1142 for assistance.
c.
If no bubbles appear after one minute, turn
LP gas tank valve "CLOSED", wipe away
solution and proceed.
Operating Main Burners
First Use
1.
Make sure all labels, packaging and protective
films have been removed from the grill.
2.
Remove manufacturing oils before cooking on this
grill for the first time by operating the grill for at
least 15 minutes on (HIGH) with the lid closed.
This will "heat clean" the internal parts and
dissipate odors.
Lighting Instructions
W CAUTION: Keep outdoor gas cooking
appliance area clear and free from
combustible materials, gasoline and
other flammable vapors and liquids.
W CAUTION: Do not obstruct the flow of
combustion and ventilation air.
W CAUTION: Check and clean burner/
venturi tubes for insects and insect
nests. A clogged tube can lead to a fire
beneath the grill.
W CAUTION: Attempting to light the
burner with the lid closed may cause
an explosion.
1.
Open lid.
2.
Make sure there are no obstructions of airflow to
the burners. Spiders and insects can nest within
and clog the burner/venturi tube at the orifice. A
clogged burner tube can lead to a fire beneath the
appliance.
3.
All control knobs must be in the " OFF" position
(Figure 3).
4.
Connect LP gas tank per "Installing LP Gas Tank" section.
5.
Turn LP gas tank valve to "OPEN."
6.
Select burner to light. Push and turn control knob to (HIGH). The burner should light.
Repeat up to three times.
Figure 1
Burner
venturi pipe
X X
LP Gas
Connection
LP Gas
Valve with
Orifice
Figure 2
Valve Soft Pipe
LP Gas
Connection
Connection
X X
LP Gas
Burner
Valve with
venturi
Orifice
pipe
Figure 3
OFF
APAGADO
Figure 4
X
X
X
X
X
Figure 5
Figure 6
Slight
Flame
Yellow
Slight
Blue
Burner
Dark
Blue
Hide quick links:
Advertisement
Table of Contents
