Table of Contents
Advertisement
The undersigned, representing the manufacturer
Rockwell Automation, Inc.
2 Executive Drive
Chelmsford, MA 01824
USA
Herewith declare that the Products:
Product identification (brand and
catalogue number/part number):
Product Safety Function:
are in conformity with the essential requirements of the following EC Directive(s) when installed in accordance with the installation instructions
contained in the product documentation:
2004/108/EC
2006/42/EC
and that the standards and/or technical specifications referenced below have been applied:
EN 55022:1998 +A1:2000 +A2:2003
EN 61496-1:2004 + A1:2008
CLC/TS 61496-2:2006
IEC 61496-2:2006
EN 61508-1:2010
EN 62061:2005
EN ISO 13849-1:2008 / AC:2009
The authorised representative is authorised to compile the Technical File.
Conformance of a type sample belonging to the above mentioned product family with the regulations from the EC Machinery Directive has been
certified by:
TÜV NORD CERT GmbH
Langemarckstr. 20,
D-45141 Essen, Germany
ID-No.: 0044
Manufacturer:
Signature
Name:
Daniel L. Nachtigall
Position:
Technical Leader - Certification Engineering
Date:
14-Apr-2011
Place:
Milwaukee, WI, USA
Document Control Number: SEN-0351-C-EN
GuardShield™ Type 2 Safety Light Curtain Installation Instructions
EC Declaration of Conformity
and the authorised representative established within the Community
Rockwell Automation BV
Rivium 1e Straat, 23
2909 LE Capelle aan den IJssel
Netherlands
GuardShield™ Type 2 Safety Light Curtains
Allen-Bradley / GuardShield 440L Series
(reference the attached list of catalogue numbers)
440L Series Type 2 safety light curtains are active optoelectronic protection devices (AOPD's)
with a resolution of 30mm. These safety light curtains are suitable for applications up to
Safety Category 2 and PLd (EN ISO 13849-1) and SIL2/SILCL2 (EN 61508/EN 62061).
EMC Directive
Machinery Directive
Information technology equipment – Radio disturbance characteristics – Limits and methods of
measurement
Safety of machinery – Electro-sensitive protective equipment – Part 1: General requirements and
tests
Safety of machinery – Electro-sensitive protective equipment – Part 2: Particular requirements for
equipment using active opto-electronic protective devices (AOPDs)
Functional safety of electrical/electronic/programmable electronic safety-related systems – Part 1:
General requirements
Safety of machinery – Functional safety of safety-related electrical, electronic and programmable
control systems
Safety of machinery – Safety related parts of control systems – Part 1: General principles for design
EC Type Examination Certificate No.
44 205 10 383326 001
Authorised Representative in the Community:
Signature
Name:
Position:
Date:
Place:
Original instructions
Viktor Schiffer
Engineering Manager
20-Apr-2011
Haan, Germany
1 / 2
23
Advertisement
Table of Contents
