Riding Downhill - Yukon Trail Hunter 4x4 EV Owner's Manual, Safety Manual, And Warranty Information

! WARNING !

Riding Downhill

When riding your vehicle downhill, shift your weight as far to the rear and uphill side of the
vehicle as possible. Move back on the seat and sit with your arms straight. Improper braking
may cause loss of traction. Use caution while descending a hill with loose or slippery surfaces.
Braking ability and traction may be adversely affected by these surfaces.
Going downhill improperly could cause a loss of control or cause the vehicle to overturn
To avoid this hazard always follow proper procedures for going down hills. Always check the
terrain carefully before you start down any hill. Shift your weight backward. Never go down
a hill at high speed. Avoid going down a hill at an angle that would cause the vehicle to lean
sharply to one side.
! WARNING !
Crossing a Slope
Traversing a sloping surface on your vehicle requires you to properly position your weight to
maintain proper balance. Be sure that you have the basic riding skills on that ground before
attempting to cross a sloping surface. Avoid slopes with slippery surfaces or rough terrain that
may upset your balance.
As you travel across a slope, lean your body in the uphill direction. It may be necessary to
correct the steering when riding on loose surfaces by pointing the front wheels slightly uphill.
When riding on slopes, be sure not to make sharp turns either up or down hill.
If your vehicle does begin to tip over, gradually steer in the downhill direction if there are no
obstacles in your path, to regain proper balance, gradually steer again in the direction you wish to
travel.
DO NOT RETURN STORE. For questions regarding assembly and use, call Customer Service: 877-441-6999.