Yukon Trail Hunter 4x4 EV Owner's Manual, Safety Manual, And Warranty Information page 12

Main Switch
Functions of the respective switch positions are as follows:
ON:
Engine can be started only at this position and the headlight and taillight come on when the light switch is on.
OFF:
All electrical circuits are switched off. The key can be removed in this position.
Entering the Vehicle
All passengers must be seated with seat belt properly fastened at all times while the Yukon Trail electric vehicle is in use.
Turning the Vehicle On
Hold brake, switch on key switch and select the desired direction (Forward or Reverse).
Driving the Vehicle
Turn key to the "On" position select the desired selection. Apply foot brake, release park brake. Release foot brake,
and accelerate smoothly. Always be aware of surrounding terrain and use caution. Judge speed accordingly. Be
cautious when encountering loose or wet terrain. Do not attempt steep grades.
Stopping the Vehicle
Slow down by pushing down the foot brake pedal. To stop, release accelerator pedal and apply foot brake pedal. To
engage Park Brake, depress Park Brake until locked.
Turning the Vehicle Off
After applying the Park Brake, switch the key to the OFF position; switch the direction selector to Neutral (N).
Exiting the Vehicle
Once the vehicle has come to a complete stop, the Park Brake is applied, the key switch is turned to the OFF
position, and the direction selector is switched to Neutral, all passengers can carefully exit the vehicle. Never
attempt to exit the vehicle while it is still moving. This could lead to severe injury.
Storing the Vehicle
Store the Yukon Trail electric vehicle with Park Brake applied, key switch in the OFF position, and the switch
selector in the Neutral (N) position.
DO NOT RETURN STORE. For questions regarding assembly and use, call Customer Service: 877-441-6999.