Advertisement
Pool Pump Size:
1. The pump on the filter system should be a full rated pump of 1HP– 1 1/2 HP.
2. A pump less than 1 horsepower may need to be upgraded for sufficient water flow. After installation of the system
and with the filter running, place your hand in the water in front of the inlet fitting. If you feel weak flow you may
first try placing the panel(s) closer to the pool. Upgrade pump if needed.
3.
If the pump is larger than 1 1/2 horsepower the optional Diverter Valve Kit (# ESDK-1) must be installed. Failure to
control the amount of water flow with a Diverter valve may result in damage to the panel.
ecoSAVER Hardware Kit and Parts List
Item No.
1
2
3
4
ecoSAVER Diverter Valve Kit (# ESDK-1)
Item No.
1
2
Make sure the support collar stays in place on the
female End Pipe fitting.
Kit (# ESRMK-1) OPTIONAL
Item No.
1
2
3
ecoSAVER INTEX Pool Adapter Kit (# ESIAK-1)
Item No.
1
Description
Female Elbow Fitting
Male Elbow Fitting w/ "O" Ring
1 1/2" S.S. Clamps
Hose Adapter w/ "O" Ring
OPTIONAL
Description
Diverter Valve
Panel Spacer
ecoSAVER Roof Mounting
Description
Stainless Steel Bracket
1.25" x .25" Diam. S/S
Screws
78" x ½" Nylon Strap
OPTIONAL
Description
INTEX Hose Adapter
Quantity
1
1
2
2
Quantity
1
1
Quantity
18
18
6
Quantity
2
4
Advertisement
