Advertisement
Specifications
1. Voltage: DC9V-DC28V
2. Current: 50 mA
3. Signal System: NTSC
4. Image Sensor: ¼" CMOS Sensor
5. Horizontal Resolution: 480 lines
6. Viewing Angle: 160 degrees
7. Minimum Illumination: 0.7 Lux
8. Image Display: Selectable Normal/Reverse Image
9. Adjustable Viewing Angle
10. Dimensions:
•
Camera: 26mm W x 30mm L
Troubleshooting
Symptom
No video signal appears while
reversing the vehicle
Video image is not sharp enough
Solution
1. Check the rear view camera
lens and clean if needed.
2. Check the rear view camera
wiring connection and RCA
connection.
3. Check the Fuse – if blown
replace ONLY with fuse of
equal amperage.
Clean the camera lens.
9
Advertisement
