Audiovox PurSuit 08SPr Programming Manual page 6

Using the edge of a coin,
or a small flat screwdriver
blade, carefully remove
transmitter back cover
keeping hold of the metal
key ring to prevent it's
loss.
Carefully remove the
discharged battery by
sliding it out from under
the clip in the direction
indicated by the arrow in
the diagram below.
Properly dispose of the
exhausted battery and
insert a new CR2032
taking care to arrange it
so that the + is facing up
toward the + symbol on
the battery clip.
To purchase replace-
ment transmitters or to
get additional product
information go to:
www.pursuitcarsecurity.com
6
128-8402a
6 of 8