Start-Up And Use; Oven Structure; Control Panel Lock; Setting The Clock - Ariston OK 897E LSC X AUS Operating Instructions Manual

Start-up and use

Oven structure

The Openspace oven has a capacity of 70 litres and
offers users the option of cooking on 4 shelves at
the same time or cooking large quantities which
would not necessarily be possible in a traditional
oven.
Thanks to the ExtraLarge Space, Openspace offers
10 cooking functions, 6 of which are universal and
suitable for any type of cooking, while the remaining
4 are automatic programmes which can be used to
achieve perfect results for any recipe.
ExtraLarge Space: cooking on 4 shelf levels
! The first time you use your appliance, heat the
empty oven with its door closed at its maximum
temperature for at least half and hour. Make sure
that the room is well ventilated before switching the
oven off and opening the oven door. The appliance
may emit a slightly unpleasant odour caused by
protective substances used during the
manufacturing process burning away.
! To make the setting process easier, press and
hold the + and – buttons to scroll through the
numbers on the display rapidly.
! Each setting will automatically be stored in the
appliance memory after 10 seconds.
Some models are equipped with a system of hinges
which allows the door to close slowly, without the
user having to follow the movement through with his/
her hand. To use the system correctly, before
closing the door:
• Open the door fully.
• Do not force the closing movement manually.
! The touch controls cannot be activated if the user
is wearing gloves.

Control panel lock

! The control panel can be locked while the oven is
off, once cooking has started or finished and during
programming.
To lock the oven controls, press and hold the
button for at least 2 seconds. A buzzer sounds and
the display shows the key symbol "n—O". The
icon, when lit, indicate lock function activation.
To deactivate the lock, press and hold the
button again for at least 2 seconds.

Setting the clock

! The clock can only be set when the oven is
switched off. If the oven is in standby mode,
pressing the
RACK
time setting. Press it again to set the time.
RACK
RACK
DRIPPING PAN
After connection to the power supply network or after
a blackout, the
display will flash for 10 seconds.
To set the clock:
1. Press button
2. Turn the TIMER knob towards "+" and "-" to
adjust the hour value.
3. Once you have reached the correct hour value,
press the
4. Repeat the above process to set the minutes.
If a blackout occurs, it will be necessary to reset the
clock. If the
indicates that the clock has not been set correctly.

Setting the minute minder

! The minute minder may be set regardless of
whether the oven is switched on or off. It does not
switch the oven on or off.
When the set time has elapsed, the minute minder
emits a buzzer that will automatically stop after 30
seconds or when any active button on the control
panel is pressed.
To adjust the minute minder, proceed as follows:
1. Press button
2. Adjust the time as desired by turning the TIMER
knob towards "+" and "-".
3. Once you have reached the desired value, press
the
The lit
button once will display the current
button and the digits on the
.
button.
icon flashes on the display, this
.
button again.
symbol will remind you that the minute
AUS
5