Parts and Functions
Control Panel
Remote control sensor
Power status Indicator
9
POWER button
1
Use this button to turn this Display on or put this Display
to standby.
MUTE button
2
Switch the audio mute ON/OFF.
INPUT button
3
Use this button to select the input source.
•
Used as [SET] button in the On-Screen-Display menu.
[ ] button
4
Increase the adjustment while OSD menu is on, or
increase the audio output level while OSD menu is off.
[ ] button
5
Decrease the adjustment while OSD menu is on, or
decrease the audio output level while OSD menu is off.
[ ] button
6
Move the highlight bar up to adjust the selected item while
OSD menu is on.
[ ] button
7
Move the highlight bar down to adjust the selected item
while OSD menu is on.
10
MUTE INPUT
10
1
2
3
4
5
6
7
MENU button
8
Press to activate the OSD menu when OSD menu is off.
Press to return to previous menu while OSD menu is on.
Remote control sensor and power status
9
indicator
•
Receives command signals from the remote control.
•
Indicates the operating status of this Display:
- Lights green when this Display is turned on
- Lights red when this Display is in standby mode
- Lights amber when this Display enters "Power Save"
mode
- When {SCHEDULE} is enabled, the light blinks
amber and red
- If the light blinks red, it indicates that a failure has
been detected
- Off when the main power of this Display is turned off
NOTE:
•
The remote control sensor and power status indicator are
arranged downward.
KENSINGTON LOCK
10
For security and theft prevention.
MENU
8