Table of Contents
Advertisement
3. Press
to highlight Databank and press
.
ENTRER
4. Press
to highlight Erase All Data and
press
.
ENTRER
5. Press Y to erase all the entries or N to
cancel the deletion.
9. Using a Password
You can use a password to keep the
information in the databank private. The
password is requested when the unit is
turned on and the databank is accessed.
9.1 Password Warnings
Warning! After you set the password, you
must enter the password to access the
databank for the first time during a session.
Always record your password and keep it in
a separate place. If you forget the password,
you must reset the unit to access the
databank.
Warning! Resetting the unit erases all user-
entered information. Always keep written
copies of your data. If you have a reset button,
use the end of a straightened paper clip to
gently press the reset button.
If you do not have a reset button, or if the
unit does not reset after pressing the reset
button, remove the batteries, wait at least two
minutes, and then re-install them. For battery
instructions, see "Replacing the Batteries".
9.2 Password Setup
1. Press
.
MENU
2. Organizer is highlighted. Press
ENTRER
to select it.
3. Press
to highlight Databank and press
.
ENTRER
4. Press
/
to highlight Set Password
and press
.
ENTRER
5. Type a password and then press
ENTRER
• Your password can have up to eight letters.
• You are prompted to retype your
password.
6. Type your password again exactly as
you did the first time.
7. Press
to confirm and enable your
ENTRER
password.
• To test the password, press
twice
and press
. Organizer is highlighted.
MENU
Press
to select it. Press
to
ENTRER
highlight Databank and then press
ENTRER
. You are then prompted to type the
password. Type it and press
.
ENTRER
• To disable the password, repeat Steps 1 to
4 above, and press
when "Enter
ENTRER
New Password" is displayed.
10. Setting the Clock
The clock lets you set a home time and view
local times around the world. You must set
the home time before viewing world times as
world times are based on home time.
10.1 Setting Home Time
1. Press
.
MENU
2. Organizer is highlighted. Press
to select it.
3. Clock is highlighted. Press
ENTRER
select it.
• You see the home time screen.
4. Press S to enter the setting mode.
5. Set Time Format is highlighted. Press
to select it.
ENTRER
• Press /
to cycle through the 12- and
24-hour day/ month/year formats.Press
to save your selection.
ENTRER
6. Press
to highlight Set DST and press
to select it.
ENTRER
• Press /
to cycle between DST On or
DST Off. Press
to select your choice.
ENTRER
7. Press
to highlight Set Time and press
to select it.
ENTRER
• Press /
until the current hour is
displayed.
• Press to move to minutes, then press
until the current minute is displayed.
• Press
to set the time.
ENTRER
8. Press
to highlight Set Date and press
to select it.
ENTRER
• Use /
to move to the next or previous
field. Use
/
to scroll to the current day/
month/year. Press
to set it.
ENTRER
9. Press
to highlight Set Home City and
press
to select it.
ENTRER
.
• Press /
until your local city is
displayed. Press
to select it.
ENTRER
10.Press
to exit setting mode.
ARR
10.2 Setting World Time
1. Press
.
MENU
2. Organizer is highlighted. Press
to select it.
3. Clock is highlighted. Press
ENTRER
select it.
• You see the home time screen.
4. Press
to toggle between home
ENTRER
time and world time.
5. Press S to enter setting mode.
6. Press
to select Set DST.
ENTRER
• Press /
to cycle between DST On or
DST Off. Press
ENTRER
7. Press
to highlight Set World City and
press
to select it.
ENTRER
• Press /
until the city you want is
displayed. Press
ENTRER
8. Press
to exit setting mode.
ARR
11. Using Calculator
1. Press
.
MENU
ENTRER
2. Organizer is highlighted. Press
to select it.
to
3. Press
to highlight Calculator and press
.
ENTRER
4. Type a number.
• A-P will type numbers 0-9 automatically.
You can type up to 10 digits. To type a
decimal, press G(.). To change the sign of a
number, press W(+/-).
5. Press a math function key.
6. Type another number.
7. Press
.
ENTRER
• Or press F(%) to calculate a percentage.
To calculate ...
reciprocals
squares
square roots
8. Press
to clear the current
EFF
calculations.
/
11.1 Using Calculator Memory
Try the following equation to practice using
the calculator memory: (32 x 12) - (8 x 8) = 320
1. Press
.
MENU
2. Organizer is highlighted. Press
to select it.
3. Press
to highlight Calculator and press
.
ENTRER
4. Press B(mc) to clear the calculator
memory, if necessary.
5. Type 32, press K(x), type 12, and then
press
.
ENTRER
6. Press X(m+) to add the result to
memory.
• m indicates when a number is stored in
ENTRER
memory.
7. Type 8, press K(x), type 8, and then
to
press
.
ENTRER
8. Press C(m-) to subtract the result from
the number stored in memory.
9. Press V(mr) to retrieve the number from
memory.
10.Press
to clear the calculator.
EFF
12. Using Metric Converter
1. Press
MENU
to select your choice.
2. Organizer is highlighted. Press
to select it.
3. Press
to highlight Conversions and
press
ENTRER
to select it.
4. Press
/
category (e.g., Weights) and then press
.
ENTRER
5. Select a conversion (e.g., grams/ounces)
and then press
ENTRER
6. Type a number after one of the units.
• A-P will type numbers 0-9 automatically.
Press
/
Press
ARR
7. Press
ENTRER
8. Press
EFF
conversion.
12.1 Using Currency Converter
1. Press
MENU
2. Organizer is highlighted. Press
to select it.
3. Press
to highlight Currency and press
Press ...
.
ENTRER
Q(1/x)
4. Enter a conversion rate and then press
D(x2)
.
ENTRER
S(√x)
• The rate should be in units of the other
currency per one unit of the home
currency (n other/1 home). For example,
to convert between U.S. dollars and euros,
enter an exchange rate of 1.3374. This
means that 1.3374 euros is the equivalent
of 1 U.S. dollar.
5. Enter an amount for the home or other
currency.
ENTRER
• Press /
to delete a number.
ARR
6. Press
ENTRER
7. Press
EFF
conversion.
13. Changing the Settings
When using this dictionary, you can adjust
the message language, screen contrast, the
shutoff time, the type size and turn the Learn
a Word feature on or off.
1. Press
MENU
2. Press
to highlight Settings and then
press
ENTRER
3. Press
/
Language, Contrast, Shutoff, Type Size or
Learn a Word and then press
• Message Language determines the
language of the menus, prompts, and help
.
ENTRER
.
to select a conversion
.
ENTRER
to move between the lines.
to delete a number.
to convert.
to clear the current
.
ENTRER
to move between the lines. Use
to convert.
to clear the current
.
.
to highlight Message
.
ENTRER
Advertisement
Table of Contents
