Important Safety Instructions; Contact Information - B-52 LS-100 Instruction And User's Manual

B-52 LS-100: 100-WATT TRI-CHANNEL GUITAR AMPLIFIER
IMPORTANT
SAFETY
INSTRUCTIONS
1) Read these instructions.
2) Follow all instructions.
3) Keep these instructions.
4) Heed all warnings.
5) Do not use the LS-100 near water. Be
cautious when moving the LS-100 during
rain or while transporting it over wet surfaces
to prevent water from getting on to the
amplifier.
6) Clean only with dry cloth.
7) Do not block any ventilation openings and
operate in accordance with manufacturer's
instructions.
8) Do not install near heat sources such as
radiators, stoves or other devices that may
produce heat.
9) Do not defeat the safety purpose of the
polarization or grounding-type plug. A
polarized plug has two blades with one wider
than the other. A grounding-type plug has two
blades and a third grounding prong. The
third prong is provided for your safety and
must not be defeated. If the provided plug
does not fit your outlet, consult an electrician for
replacement of the obsolete outlet.
10) Protect the power cord from being walked on
or pinched, particularly at the plug and the
point where it exits the LS-100 amplifier.
11) Only use attachments / accessories specified
by B-52 Professional.
12) Unplug the LS-100 during lightning storms
and when not in use.
13) Refer all servicing to qualified personnel.
Servicing is required if the LS-100 has
been damaged in any way. Do not operate the
unit if the power-cord or plug is damaged,
liquid has been spilled into the amplifier, the
unit has been exposed to moisture or rain,
does not operate normally, or has been dropped.
14) To reduce the risk of fire or electric shock, do
not expose the LS-100 to rain or moisture.
15) Moisture can damage the LS-100 and can
cause corrosion of electrical contacts.
16) Keep the unit out of extended or intense
direct sun light. Do not place containers filled
with any type of liquid on or near the LS-100.
17) Never remove the front or rear panels of
the LS-100. There are no user serviceable
parts inside.
2
INSIdE THIS INSTRUCTION MANUAL
Important Safety Instructions / Features .......................... 2
Important Information .................................................. 3
LS-100 Controls .......................................................... 4-5
Set-up & Warranty Information ...................................... 5-7

Contact Information ..................................................... 8

B-52 LS-100 FEATURES
The B-52 LS-100 represents the latest in the ever expanding line of highly
acclaimed B-52 guitar amps. New, user-friendly features combined with the
latest advancements in preamp technology makes the LS-100 an outstand-
ing choice for the professional player and the weekend warrior. The clean
channel now has the innovative B-52 "Mid Cut" feature. This pushbutton
allows you to select the classic, warm vintage sound or a pristine, almost
acoustic-like tone with tons of headroom. The overdrive channels go from
moderate classic breakup to monstrous gain, totally controllable thanks to
the individual gain and master controls for each overdrive mode. The over-
drive channels now feature the new, B-52 assignable Contour control. This
allows you to preset the Contour control and have it automatically activate
on the gain channel of your choice. You can set one overdrive channel for
a punchy midrange tone with the Contour off and turn the Contour on the
other overdrive channel for a massive, totally scooped out metal tone.
• ¼" input jack
• Overdrive channel with Gain 1, Gain 2, assignable Contour,
3-band EQ and individual Volume 1 and Volume 2 controls
• Clean channel with Volume, 3 band EQ and a
• Mid cut switch.
• Master section with Volume and Reverb controls.
• Rugged footswitch for Channel Select, Gain Select and
Reverb on/off.
• Front panel push switches for channel, gain select and
Contour assign
• Effects send and return with level controls
• Cabinet simulated line out with level control for direct recording
• Two speaker output jacks
• International voltage select switch for 115 volts and 230 volts
• 27" x 11" x 12" (W x H x D)
• Weight: 34 lbs.
The lightning flash with arrowhead symbol within the equilateral triangle is intended to alert the use to the
presence of un-insulated "dangerous voltage" within the product's enclosure that may be of sufficient
magnitude to constitute a risk of electric shock.
The exclamation point within the equilateral triangle is intended to alert the user to the presence of important
operation and maintenance (servicing) instructions in the literature accompanying this appliance.
CAUTION: To reduce the risk of electric shock, do not
remove any cover. No user-serviceable parts inside. Refer
servicing to qualified service personnel only.