Gigaware 40-220 Quick Manual

Alarm Clock Radio
with Dock for iPod
– SET +
In AM/FM radio mode, rotate to tune stations.
Also use to set the clock and alarm time.
G
AL SET
Set and
confirm the
alarm time.
AL1/AL2 AL MODE SNOOZE/NAP
Set, activate, Toggle between Silence the alarm for
deactivate, alarm modes: 9 minutes when the
or reset the Radio, iPod and alarm sounds.
alarm. beeP .
Choose your nap
period.
AC Adapter
®
Thank you for purchasing your Alarm Clock Radio with Dock
for iPod from RadioShack. Please read this user's guide before
installing, setting up, and using your new product.
TIME SET – VOLUME +
Press to set the Rotate to
clock time and adjust the
confirm the option. volume.
DIMMER
FUNCTION
Toggle sound
source: iPod,
Aux, or Radio.
SLEEP
Set the unit to turn off after a
certain time period.
After setting, press to view
remaining time.
AUX IN
To use your alarm
clock radio as a
speaker, connect an
audio source (audio
cable included).
To listen, select AUX
mode.
FM ANT
Extend the antenna for
best radio reception.
40-220
G
Turn your alarm
clock radio and
the iPod on/off.
SLEEP
 / 
Go to the previous
or next track.
Hold down
during playback
to rewind or fast
forward.
/
Increase or
decrease the
volume.
DIMMER
Adjust display
brightness.
ALARM 1/2
Press once or
more to activate
or deactivate
either alarm.
SNOOZE/NAP
www.radioshack.com
Protect the environment by recycling used electronics.
Go to www.ecyclingcentral.com to find a recycle location
near you.
What's Included
Alarm Clock Radio
Remote control with battery
AC Adapter
Cradle (5)
Audio Cable
User's Guide
Features
• Compatible with iPod nano, iPod classic, and
iPod touch models
• AM/FM radio
• Dual alarm to wake you up by iPod, AM or FM
Radio, or a Beep
MENU
• Adjustable LCD backlight. The display shows
Return to
time, audio mode and alarm mode
previous menu.
• Snooze/Nap function
FUNC
• Sleep function
Toggle sound

Specifications

source: iPod,
Aux, or Radio.
Power Supply .....................................DC 12V
Backup battery ...... 2 AA batteries (not included)
TIME SET
Remote Control battery ................ 3V, CR2025
ENTER
Frequency Range .............. AM 520 – 1710kHz
Confirm a menu
..................................... FM 87.5 – 108MHz
item.
Dimensions (H×W×D) ....................................
§
(3.54 × 10.23 × 6.22in) (90 × 260 × 158mm)
Play or pause
AC Adapter
playback.
Input........... 120-240V – 50/60Hz 0.45A Max
/
) (
Output ........................................... 12V – 1A
Go to the
Specifications are subject to change and
previous or next
improvement without notice. Actual product may
menu item or
vary from the images found in this document.
tune a radio
station.
RF Emissions Information
ALARM MODE
This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules.
ALARM SET
These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment
Press to set
generates, uses, and can radiate radio frequency energy and, if not
the alarm time
installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there is no
and confirm the
guarantee that interference will not occur in a particular installation. If
option.
this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one
or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from
that to which the receiver is connected.
• Consult your local RadioShack store or an experienced radio/TV
technician for help.
If you cannot eliminate the interference, the FCC requires that you
stop using your Alarm Clock Radio. Changes or modifications not
expressly approved by RadioShack may cause interference and void
the user's authority to operate the equipment.
This device complies with Part 15 of the FCC Rules. Operation
is subject to the following two conditions: (1) This device may
not cause harmful interference, and (2) This device must accept
any interference received, including interference that may cause
undesired operation.