Auxiliary Dc Jack - Yamaha RS90PB Owner's Manual

RS90P / RS90PLT / RST90PGT
1
1. Grip warmer adjusting switch
RST90
1
1. Grip warmer adjusting switch
1. Thumb warmer adjusting switch
To raise the temperature
To raise the temperature, press the respec-
tive switch to "HI".
To lower the temperature
To lower the temperature, press the respec-
tive switch to "LO".
Control functions
See "Fuel meter and grip/thumb warmer level
indicator" on page 19 for detailed information.
ESU10696

Auxiliary DC jack

The auxiliary DC jack is located in the front
panel and can be used for accessories.
TIP
The auxiliary DC jack can only be used if the
engine is running.
To use the auxiliary DC jack
1. Start the engine.
2. Open the auxiliary DC jack cap, and then
insert the accessory power plug into the
jack.
RS90P / RS90PLT / RST90PGT
1. Auxiliary DC jack cap
2. Auxiliary DC jack
RST90
1. Auxiliary DC jack cap
2. Auxiliary DC jack
1
2
25