Installing Battery - Denpa User Manual User Manual

Installing battery

▲
Attention:
*Power off the unit before replacing battery.
*Do not take out battery during recording. The recorded messages
will be deleted or the unit might malfunction.
*Remove the battery if you will not use the unit for a long time.
Otherwise, battery leakage will cause damage to the unit.
*Damage caused by battery leakage would not be included in the
warranty condition.
*All recorded messages will be kept safely when replacing the
battery.
Battery replacement
(Note: Alkaline battery is recommended, Carbon zine battery is not
recommended)
1. Pull battery cover along the direction of  and open it.
2. Place an AAA battery in the battery compartment (At the time,
make sure to match "+" and "-" ends of the battery with the
signs shown in the compartment).
3. Close the battery cover back.
Open the battery cover Close the battery cover
5
VT-50｜