Fm Operation - Denpa User Manual User Manual

FM Operation

▲
Enter FM operation
Push MODE key to select FM mode. (please make sure to plug in
the earphone to the earphone jack of the unit.)
Station channel
Push or
frequency by 0.1 MHz step.
Example : When the frequency is under 96.2MHz, push >> once to
increase 0.1MHz. Now it is 96.3MHz. If you push << once, it will be
decreased 0.1MHz to 96.2MHz.
Fast scanning
Push and hold
to scan valid stations. When a station is searched, it will stay three
seconds then continue to search again.
You can push PLAY key to save the station if you desired. You can
store up to 18 stations from CH03 ~ CH20.
Note : CH01~CH02 are frequencies for wireless microphone(an
optional accessory)
Stored channels
Push or
FM mode. Push and hold PLAY three seconds to store.
Listen to the stored channels
Push PLAY key under FM mode to select the stored channels.
Push PLAY continuously to switch the stored channels one by one.
once to increase frequency or decrease
or three seconds to start fast scanning
to select the station you want to save under
17
VT-50｜