Performance And Lockup Problems - Lenovo ThinkCentre E93z User Manual

Machine types: 10b8, 10b9, 10ba, 10bh, 10bj, 10bk, 10cx, and 10cy
Hide thumbs Also See for ThinkCentre E93z:
Table of Contents

Advertisement

• If the option comes with its own test instructions, use those instructions to test the option.
• If the failing option is a SCSI option, verify that:
– The cables for all external SCSI options are connected correctly.
– The last option in each SCSI chain, or the end of the SCSI cable, is terminated correctly.
– All external SCSI options are turned on. External SCSI options must be turned on before the computer
is turned on. For more information, see your SCSI documentation.
• Verify that the option and any required device drivers are installed correctly.
If these actions do not correct the problem, run the Lenovo Solution Center program. If you need technical
assistance, see Chapter 11 "Getting information, help, and service" on page 87.

Performance and lockup problems

Poor performance and lockup problems can be a result of any of the following:
"Insufficient free hard disk drive space" on page 82
"Excessive number of fragmented files" on page 83
"Insufficient memory" on page 83
Make a selection from the above list to find out more about the corrective actions you can take.
Insufficient free hard disk drive space
Symptom: Insufficient free hard disk drive space
The Windows operating system will slow down and might produce errors if the hard disk drive gets too full.
To check the amount of free space on the Windows 7 operating system, do the following:
1. Click Start ➙ Computer.
2. Right-click your C drive entry and then click Properties. The amount of free disk space is displayed.
To check the amount of free space on the Windows 8 operating system, do the following:
1. Open File Explorer and click Computer.
2. Right-click your C drive entry and then click Properties. The amount of free disk space is displayed.
To check the amount of free space on the Windows 8.1 operating system, do the following:
1. Open File Explorer.
2. Right-click your C drive entry and then click Properties. The amount of free disk space is displayed.
To free up disk space, do any of the following:
• Method 1
1. On the Windows 7 operating system, click Start ➙ Computer. On the Windows 8 operating system,
open File Explorer and click Computer. On the Windows 8.1 operating system, open File Explorer.
2. Right-click your C drive entry and then click Properties.
3. Click Disk Cleanup.
4. A list of unnecessary file categories is displayed. Select each file category you want to delete,
and then click OK.
• Method 2
1. Open Control Panel.
82
ThinkCentre E93z User Guide

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents