Table of Contents
Advertisement
Floor Protector
If the stove is to be installed on a combustible floor, it must be placed on an approved
2
o
1" (25mm) non-combustible hearth pad with k = 0.42 (BTU)(in)/(ft
)(hr)(
F). The floor
protector must extend 8" beyond each side of the flue loading and ash removal opening
and 16" to the front.
In a rear vent installation the floor protection must also extend under the stovepipe and
a minimum of 2" (50mm) beyond either side of the pipe.
Page 3
Advertisement
Table of Contents
