Table of Contents
Advertisement
Operation
Use clean and dry wood only. Chemical treated wood, painted, varnished etc. or saltwater
driftwood will harm the stove over time. Pile and store wood outdoors under cover. Do not
place or store wood within stove installation clearances or within the space required for
charging and ash removal.
Never use gasoline, gasoline type lantern fuel, kerosene, charcoal lighter fluid, or similar
liquids to start or freshen up a fire in this heater. Keep all such liquids well away from the
heater while it is in use.
Do not elevate the fire, build wood fire directly on firebox hearth. Light a fire using finely
chopped wood and establish it so that it has plenty of flames. When the firebox is loaded,
close the door. This will avoid having smoke come into the room.
Do not tamper with or use the spin draft air control in the fuel loading door, using this control
will cause an overfiring condition.
WARNING: Do not overfire. If the stovetop or chimney connector pipe glow red, you are
overfiring.
Page 11
Advertisement
Table of Contents
