Carbon Monoxide Ppm Levels; Dangerous Levels; High Levels; Mid Levels - Kidde KN-COPF-i User Manual

Carbon monoxide alarm
Hide thumbs Also See for KN-COPF-i:
Table of Contents

Advertisement

1. Information About Carbon Monoxide

Carbon Monoxide PPM Levels

This model is equipped with a digital display that shows levels of CO
(displayed in PPM – parts per million). Learn the difference between dan-
gerous, high, mid and low levels.

Dangerous Levels:

When someone is experiencing symptoms of CO poisoning and CO
readings are generally above 100 PPM. Anytime someone is experiencing
the symptoms of CO poisoning this should be treated as an emergency.
See "What to do When the Alarm Sounds" (inside front cover).

High Levels:

Generally above 100 PPM, with no one experiencing symptoms. This
should be treated as an urgent situation. See "What to do When the
Alarm Sounds" (inside front cover).

Mid Levels:

Generally between 50 PPM to 100 PPM. This should be cause for
concern and should not be ignored or dismissed. See "What to do
When the Alarm Sounds" (inside front cover).
Low Levels:
Generally below 50 PPM. Kidde recommends you take action to
eliminate the source of CO. See "What to do When the Alarm Sounds"
(inside front cover).
IMPORTANT: If the alarm sounds, it should be treated as a poten-
tially serious condition. See "What to do When the Alarm Sounds"
(inside front cover).
Possible Sources of Carbon Monoxide
Inside your home, appliances used for heating and cooking are the most
likely sources of CO. Vehicles running in attached garages can also
produce dangerous levels of CO.
CO can be produced when burning any fossil fuel, such as gasoline,
propane, natural gas, oil and wood. It can be produced by any fuel-
burning appliance that is malfunctioning, improperly installed, or not
ventilated correctly, such as:
• Automobiles, furnaces, gas ranges/stoves, gas clothes dryers, water
heaters, portable fuel burning space heaters and generators,
fireplaces, wood-burning stoves and certain swimming pool heaters.
• Blocked chimneys or flues, back drafts and changes in air pressure,
corroded or disconnected vent pipes, loose or cracked furnace

Hide quick links:

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the KN-COPF-i and is the answer not in the manual?

Subscribe to Our Youtube Channel

Table of Contents