Table of Contents
Advertisement
USING THE FLOPPY DISK DRIVE
Loading a Disk
To load a disk into your disk drive, follow these steps:
1. Orient the disk so that its label is facing upwards and the
shutter side is pointing towards the drive (see Figure 2).
Floppy Disk
Drive Access
Indicator
Figure 2. Loading/Ejecting a 3.5" Floppy Disk
2. Push the disk into the drive until the Eject button pops
out and you hear a click.
When there is no disk in the drive, the Eject
button is flush with your drive.
Ejecting a Disk
To eject a disk from the disk drive, follow these easy steps:
1. Check that the Floppy Disk Drive Access indicator is
off (see Figure 3).
Eject Button
5
Advertisement
Table of Contents
