American Standard MONTERREY 6540.14 Installation Instructions

SPREAD LAVATORY
FAUCETS
Thank you for selecting American-Standard...
the benchmark of fine quality for over 100 years.
To ensure that your installation proceeds smoothly--
please read these instructions carefully before you begin.
Recommended tools
Screwdriver
1
SPOUT OR BASE ASSEMBLY
Insert SPOUT SHANK (1) through center hole of mounting surface, making sure
RUBBER GASKET (2) is properly positioned in SPOUT BASE (3).
Assemble RUBBER WASHER (4), BRASS WASHER (5), and LOCKNUT (6) onto threads of
SPOUT SHANK (1) from underside of mounting surface.
Align SPOUT (7) and tighten LOCKNUT (6). Be sure slot in BRASS WASHER (5) is
positioned to the rear as shown.
1a
TO CHANGE SPOUT TO A SWIVEL SPOUT:
Unscrew SPOUT NUT (8) and remove SPOUT (7).
Take SPOUT CLIP (9) off SPOUT (7) and remove RUBBER RING (10).
Replace RUBBER RING (10) with seperate PLASTIC RING (11) packed with faucet.
Put SPOUT CLIP (9) on SPOUT (7).
Reassemble SPOUT (7) to SPOUT BASE (3).
Installation
Instructions
Channel Locks
Turn off water at
CAUTION
main supply.
3
6540.140
6540.170
6542.140
6542.170
6542.145
6540.175
6542.175
Adjustable Wrench
3
2
1
7
8
10
9
11
Certified to comply with ANSI A112.18.1M
M 9 6 8 5 0 8 R E V. 1 . 3
Tubing Cutter
7
4
5
6