Jensen VM9314 Operating Instructions Manual page 27

VM9314
Setting
OSD English
DEMO Run
SWC (Steering Wheel Control) Sub-menu Features
The VM9314 is compatible with the PAC (Pacific Accessory Corporation)
steering wheel control adapter SWI-PS. A 3.5mm female connector (labeled
"SWC Interface") on the back of the head unit allows connectivity to the PAC
adapter. Please refer to the instructions included with the PAC adapter for
detailed installation information.
The SWC menu allows you to assign different functions to the SWC buttons.
To change a button assignment, touch the function name and follow the
instructions in the pop-up window.
The following default controls are available for most vehicles:
1. Vol Down
2. Vol Up
3. Mute
4. Seek Down / Previous Track / ** Preset Down
5. Seek Up / Next Track / ** Preset Up
6. SRC (Source)
7. ** Select
8. ** Select
9. Band
** If additional steering wheel control buttons are available on the vehicle,
function 7 / 8 may be assigned the "Select" feature. This feature / function may
not be available on some vehicles. If "Select" (function 7 or 8) is held down
and function 4 is pressed momentarily, Preset Up will be selected. If "Select"
(function 7 or 8) is held down and function 5 is pressed momentarily, Preset
Down will be selected.
NOTE: The VM9314 offers the option to reprogram one of your steering
wheel controls to operate as the "PTT" (Push To Talk) control on the
VM9314 to activate voice control for a truly hands-free music
management experience.
Options
English is the only available On Screen Display option.
Demo scrolls through the various source screens, simu-
lating activity on the display. "Demo" is displayed in the
top left corner of the screen, to indicate the unit is in
Demo Mode. To stop Demo Mode, press the upper-left
quadrant of the TFT (Source select).
Function
23