Table of Contents
Advertisement
HAMMER DRILLS
STOCK No.63171
IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY TO ENSURE THE
07/2000
This manual has been compiled by Draper Tools and is an integrated part of the power tool equipment, which
should be kept with the machine.
This manual describes the purpose for which this tool has been designed and contains all the necessary
information to ensure its correct and safe use.We recommend that this manual is read before any operation of
the machine, before performing any kind of adjustment to the machine, and prior to any maintenance tasks. By
following all the general safety instructions contained in this manual, it will ensure both machine and operator
safety, together with longer life of the tool itself.
All photographs and drawings in this manual are supplied by Draper Tools to help illustrate the operation of the
machine.
Whilst every effort has been made to ensure accuracy of information contained in this manual, the Draper Tool
policy of continuous improvement determines the right to make modifications without prior warning.
63172
• INSTRUCTIONS •
SAFE AND EFFECTIVE USE OF THIS TOOL.
GENERAL INFORMATION
PART No.PT500V
PT710V
Advertisement
Table of Contents
Related Manuals for Draper PT500V
Summary of Contents for Draper PT500V
-
Page 1: Hammer Drills
07/2000 GENERAL INFORMATION This manual has been compiled by Draper Tools and is an integrated part of the power tool equipment, which should be kept with the machine. This manual describes the purpose for which this tool has been designed and contains all the necessary information to ensure its correct and safe use.We recommend that this manual is read before any operation of... -
Page 2: Table Of Contents
Know Your Hammer Drill ..................5 Operation & Use ....................6 Maintenance/Optional accessories ..............7 DECLARATION OF CONFORMITY Draper Tools Ltd. Hursley Road, Chandler’s Ford, Eastleigh, Hampshire. SO53 1YF. England. Declare under our sole responsibility that the product: Stock No:- 63171 & 63172 Part No:- PT500V &... -
Page 3: Specification/Guarantee
This guarantee applies in lieu of any other guarantee expressed or implied and variations of its terms are not authorised. Your Draper guarantee is not effective unless you produce a dated receipt or invoice to verify your proof of purchase within the 12 month period. -
Page 4: Power Supply
(i.e. red). Fuse covers are available from your Draper Tools stockist. If the fitted plug is not suitable, it should be cut off and destroyed. *The end of the cable should now be suitably prepared and the correct type of plug fitted. -
Page 5: General Safety Instructions
IMPORTANT Draper Tools Limited recommends that this machine should not be modified or used for any application other than that for which it was designed. If you are unsure of its relative applications do not hesitate to contact us in writing and we will advise you. -
Page 6: Know Your Hammer Drill
✕✌ ✕✕✌ ✙✌ ✘✌ ✚✌ ✢✌ ✛✌ ✜✌ ✕✖✌ ✕✗✌ 1. Draper Logo. 8. Adjustable Hand Grip. 2. Rating Plate. 9. Hammer Knob. 3. Switch. 10. Chuck. 4. Speed Regulator. 11. Depth Stop. 5. Reverse Selector. 12. Chuck Key. 6. Switch lock button. -
Page 7: Operation & Use
OPERATION & USE IMPORTANT: Make sure that the mains voltage matches the voltage stated on the machines rating plate. SWITCH: The switch ✪✌ on both of these tools are fitted ✬✌ ✮✌ ✫✌ with a locking device, ✫✌, allowing the tool to be operated for long periods of time without interruptions. -
Page 8: Maintenance/Optional Accessories
- Do not dispose of together with solid urban waste products; - Contact the special recycling centres. WARNING Disconnect the plug from the power supply socket before replacing any parts. OPTIONAL ACCESSORIES For a full range of optional accessories, please refer to your Draper catalogue. - 7 -... - Page 9 NOTES - 8 -...
- Page 10 NOTES - 9 -...
- Page 11 NOTES - 10 -...
- Page 12 ©Published by Draper Tools Ltd. No part of this publication may be reproduced, stored in a retrieval system or transmitted in any form or by any means, electronic, mechanical photocopying, recording or otherwise without prior permission in writing from Draper Tools Ltd.
Need help?
Do you have a question about the PT500V and is the answer not in the manual?
Questions and answers