Table of Contents
Advertisement
Quick Links
CORDLESS DRILLS
STOCK No. 54441.
STOCK No. 54442.
STOCK No. 54443.
STOCK No. 54445.
STOCK No. 54444.
STOCK No. 54446.
STOCK No. 57806.
STOCK No. 57807.
IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY TO ENSURE THE
This manual has been compiled by Draper Tools and is an integrated part of the power tool equipment, which should be kept with the
machine.
This manual describes the purpose for which this tool has been designed and contains all the necessary information to ensure its correct
and safe use.We recommend that this manual is read before any operation of the machine, before performing any kind of adjustment to the
machine, and prior to any maintenance tasks. By following all the general safety instructions contained in this manual, it will ensure both
machine and operator safety, together with longer life of the tool itself.
All photographs and drawings in this manual are supplied by Draper Tools to help illustrate the operation of the machine.
Whilst every effort has been made to ensure accuracy of information contained in this manual, the Draper Tool policy of continuous
improvement determines the right to make modifications without prior warning.
• INSTRUCTIONS •
SAFE AND EFFECTIVE USE OF THIS TOOL.
GENERAL INFORMATION
PART No. CHD96V.
PART No. CRD12V.
PART No. CHD12V.
PART No. CHD12V2.
PART No. CHD14V.
PART No. CHD14V2.
PART No. CHD142VPLUS.
PART No. CHD182VPLUS.
06/2000
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Draper CHD96V
Summary of Contents for Draper CHD96V
-
Page 1: General Information
06/2000 GENERAL INFORMATION This manual has been compiled by Draper Tools and is an integrated part of the power tool equipment, which should be kept with the machine. This manual describes the purpose for which this tool has been designed and contains all the necessary information to ensure its correct and safe use.We recommend that this manual is read before any operation of the machine, before performing any kind of adjustment to the... -
Page 2: Declaration Of Conformity
This guarantee applies in lieu of any other guarantee expressed or implied and variations of its terms are not authorised. Your Draper guarantee is not effective unless you produce a dated receipt or invoice to verify your proof of purchase within the 12 month period. - Page 3 - 2 -...
-
Page 4: General Safety Instructions For Power Tools
IMPORTANT Draper Tools Limited recommends that this machine should not be modified or used for any application other than that for which it was designed. If you are unsure of its relative applications do not hesitate to contact us in writing and we will advise you. -
Page 5: Added Safety Instructions For Cordless Power Tools
Do not dispose of batteries or cells in a charged condition. Expired nickel-cadmium batteries must be recycled/disposed of in accordance with the appropriate regulations or legislation. They should be returned to your local warranty agent/stockist. DRAPER POWER HELPLINE: ( 023 ) 8049 4344 - 4 -... -
Page 6: Power Supply
(i.e. red). Fuse covers are available from your Draper Tools stockist. If the fitted plug is not suitable, it should be cut off and destroyed. *The end of the cable should now be suitably prepared and the correct type of plug fitted. -
Page 7: Unpacking And Checking Contents
Referring to Fig.A. carefully check that all the parts are present. If any parts are missing or damaged please contact the stockist where your purchase was made or call the Draper Power Helpline on (023) 8049 4344. - 6 -... -
Page 8: Getting To Know Your Cordless Drill/Charger
GETTING TO KNOW YOUR CORDLESS DRILL/CHARGER ✮✌ ✴✌ CHD96V - CHD14V2 ✱✌ ✬✌ CHD142V Plus - CHD182V Plus ✭✌ ✫✌ WARNING: Please ensure the Battery Pack ✪✌ is installed correctly before charging. ✲✌ ✳✌ ✯✌ ✰✌ FIG.B ✪✌ TRIGGER - When the variable speed trigger switch is depressed the chuck will rotate (providing the direction switch is in a clockwise or anticlockwise position). -
Page 9: Operation
(fig.1). Plug the battery charger unit into a 230V/A.C. 13 amp, three-pin socket. For the CHD96V, CRD12V, CHD12V, CHD12V2, CHD14V & CHD14V2 place the battery in the charger as shown in (fig 2A). For the CHD142V Plus and the Fig.2A. -
Page 10: Changing Speeds
OPERATION cont’d ... CHANGING SPEEDS Fig.6. To change the speed of the chuck, push the two-speed gearbox selection switch ✫✌, (fig. 6 and 7) forwards for low speed, or backwards for high speed. IMPORTANT: ONLY CHANGE SPEED WHEN THE MACHINE HAS STOPPED. ✫✌... -
Page 11: Maintenance
OPERATION cont’d ... DRILLING WOOD AND PLASTIC To prevent splitting around the drill holes on the reverse side, place a piece of scrap timber under the material to be drilled. DRILLING MASONRY Start drilling at a low speed to prevent the drill bit from wandering. Once penetration is achieved fully depress the trigger to achieve maximum speed and hammer power. - Page 12 Draper Tools Ltd. permission in writing from Draper Tools Ltd.
Need help?
Do you have a question about the CHD96V and is the answer not in the manual?
Questions and answers