Page 4
Phase Plus Elite Rock Elite Ortho OFF/ON Hydrogum 5 Neocolloid Elite Master Elite Arti Hydrogum Prog. 1 Elite Model Prog. 1 Orthoprint Prog. 2 Elite Model Fast Prog. 2 Tropicalgin Prog. 3 Elite Stone Prog. 3 Status Mixing Time hurrimix...
Page 5
Hydrocolor 5 Phase Plus Elite Rock Elite Ortho Hydrogum 5 Neocolloid Elite Master Elite Arti Prog. 1 Prog. 1 Hydrogum Elite Model Orthoprint Prog. 2 Elite Model Fast Prog. 2 Tropicalgin Prog. 3 Elite Stone Prog. 3 Status Mixing Time hurrimix...
Warnings and precautions Accepted environmental conditions Space necessary for use 6.3.1 Worktop Power source connection Start-up Zhermack preset Programs Declared use Non-declared and prohibited use USING ThE EQUIPMENT General warnings Use of the mixer with alginate Use of the mixer with plaster...
Page 7
• commissioning; • use of non-original spare parts. • correct programmed maintenance; • attention to the most elementary safety and accident-prevention As of this moment Zhermack S.p.A. is relieved from all regulations. liability if any type of modification or tampering is made This Manual is divided into 9 chapters, each referring to a specific on the equipment without previous written authorisation subject inherent to the entire equipment.
Page 8
13. Containers for plaster mixing XR0250810 14. Set of spatulas XR0250820 The device described in this manual is the hurrimix mixer, designed 15. Pre-mix stick XR0250830 for mixing automatically alginates and plasters for dental use. 16. Bottle with graduated measuring cup XR0250840 (*) Order Code to be used when ordering spare parts.
6.3.1 WORKTOP DISPOSAL / DISMANTLING Fig. g: hurrimix mixer has been designed to work on a rigid worktop and parallel to the ground. Suitable worktops include service When disposing of the packaging material the user must follow the...
The mixing container is liable to wear and should be replaced after a period of time. hurrimix mixer has been designed to mix alginates and plasters for the dental industry. Fig. 10: Place the container inside the equipment and close the door.
Fig. 19: Once the program has been selected (fig.13, B), press the START button to start a mixing cycle. EXTRAORDINARY MAINTENANCE hurrimix mixing accelerates the setting time of the Extraordinary maintenance includes the repair of any accidental mixture; use cold water to limit the phenomenon. breakage and the replacement of worn or malfunctioning parts.
The serial number has been removed, cancelled or altered. 7. The components to be replaced under warranty, must be 10. ATTAChMENTS returned to Zhermack S.p.A. which will then send the appropriate spare parts. Any changed parts that are not returned will be 10.1 EC DECLARATION OF CONFORMITY charged.
Page 13
........................................................................................................The reference figures are present on pages 3, 4, 5 and 6 of this manual and in the product Quick Guide. hurrimix...