Configuring Offline Charging For R-Ewag - Cisco ASR 5000 Administration Manual

▀ R-eWAG Configuration
 In the above configuration, the Congestion Control thresholds featured are at the system level and are not
specific to R-eWAG.
 R-eWAG supports only critical threshold values.
Verifying your Configuration
To verify your Congestion Control configuration, in the Exec Mode issue the following command:
show congestion-control configuration
The output of this command displays information including whether or not Congestion Control is enabled/disabled,
Congestion Control threshold parameter settings, Congestion Control policy, and more.

Configuring Offline Charging for R-eWAG

To configure Offline Charging for R-eWAG, use the following configuration:
configure
gtpp single-source
context <context_name>
#To configure GTPP Group:
gtpp group <gttp_group_name>
#To configure charging agent:
gtpp charging-agent address <ip_address>
#To configure GTPP dictionary:
gtpp dictionary <gtpp_dictionary>
#To configure remote server address:
gtpp server <ip_address>
#To configure triggers:
gtpp trigger volume-limit
#To configure CDR attributes:
gtpp attribute local-record-sequence-number
gtpp attribute msisdn
gtpp attribute rat
exit
#To configure accounting policy:
▄ Cisco ASR 5000 Enhanced Wireless Access Gateway Administration Guide
60
RADIUS-based Enhanced Wireless Access Gateway Configuration