Cisco ASR 5000 Administration Manual page 57

RADIUS-based Enhanced Wireless Access Gateway Configuration
ruledef <h323_ruledef_name>
udp either-port <operator> <value>
rule-application routing
exit
ruledef <h323_multi_ruledef_name>
udp either-port <operator> <value>
rule-application routing
exit
ruledef <h323_tcp_ruledef_name>
tcp either-port <operator> <value>
rule-application routing
exit
#To configure the routing rule priorities in the rulebase:
rulebase <rulebase_name>
route priority <route_priority> ruledef <ftp_control_ruledef_name> analyzer ftp-
control
route priority <route_priority> ruledef <ftp_data_ruledef_name> analyzer ftp-
data
route priority <route_priority> ruledef <rtsp_ruledef_name> analyzer rtsp
route priority <route_priority> ruledef <pptp_ruledef_name> analyzer pptp
route priority <route_priority> ruledef <tftp_ruledef_name> analyzer tftp
route priority <route_priority> ruledef <sip_ruledef_name> analyzer sip advanced
route priority <route_priority> ruledef <h323_ruledef_name> analyzer h323
route priority <route_priority> ruledef <h323_multi_ruledef_name> analyzer h323
route priority <route_priority> ruledef <h323_tcp_ruledef_name> analyzer h323
exit
#To enable payload (Layer 7) translation of IP packets, in the ECS service:
firewall nat-alg ftp
firewall nat-alg pptp
firewall nat-alg rtsp
Cisco ASR 5000 Enhanced Wireless Access Gateway Administration Guide ▄
R-eWAG Configuration ▀
57