Phone; The Battery; Installing The Battery; Removing The Battery - LG enV touch User Manual

The Battery

It is important to fully charge the
NOTE
battery before initial use of the phone.
The phone comes with a
rechargeable battery. Keep the
battery charged while not in use in
order to maximize talk and standby
time. The battery charge level is
shown at the top of the LCD screen.

Installing the Battery

To install the battery, insert the edge
opposite of the battery contacts into
the opening on the back of the
phone. Push the battery down until
it clicks into place.

Removing the Battery

Turn power off. Slide the battery
release latch away from the edge of
the battery, then lift the edge of the
battery to remove it.
Getting Started with Your Phone

Charging the Battery

Your enV TOUCH device comes
®
with a cableless wall adapter and a
USB data cable which connect
together to charge your phone. To
charge your phone:
NOTICE
Please use only an approved charging accessory to
charge your LG phone. Improper handling of the charging
port, as well as the use of an incompatible charger, may
cause damage to your phone and void the warranty.
1. Connect the USB data cable into
the cableless wall adapter. When
connecting as shown below, the
LG logo on the USB cable should
face toward you.
2. Gently uncover the accessory
charging port, then plug the USB
data cable (as shown below) into the
phone' s charger port and the other
end into an electrical outlet.
NOTICE
Please make sure that
the 'B' side faces up
before inserting a charger
or data cable into the charger
port of your phone.
3. The charge time varies
depending upon the battery level.
Cableless Wall Adapter
25