Developer Options - Samsung GALAXY Note User Manual

• Tilt to zoom: Once enabled, you must be on a screen where
content can be zoomed. In a single motion, touch and hold two
points on the display then tilt the device back and forth to zoom
in or out.
• Pan to edit: Once enabled, allows you to move an on-screen
icon from one screen to another by simply holding it down then
moving the device left or right. You can also adjust the
sensitivity of this detection.
• Double tap: Once enabled, double tap the top of the device to
activate the Voice command functionality.
• Turn over to mute: Once enabled, turn over the device (screen
down) to mute incoming calls and currently playing sounds.
For more information, refer to "Using Gestures" on page 59.
293

Developer Options

Use the Developer options to set options for application
development.
Press
options.
Important! These features are used for development purposes
only.
USB Debugging
When enabled, allows debugging when the device is
attached to a PC by a USB cable.
1. Press
options.
2. Tap USB debugging to enable or disable the setting.
When enabled, a check mark appears in the check box.
Development device ID
The identification number for your device when using it as a
development tool displays in this field.
and then tap Settings Developer
and then tap Settings Developer