Important Safety Information; Owner's Record; For Customers In The United States - Pyle PT798SBA Owner's Manual

Bluetooth receiver
Hide thumbs Also See for PT798SBA:
Table of Contents

Advertisement

Important Safety Information
OWNER'S RECORD
The model and serial number are located on the rear of the unit. Record the serial number in the
space provided below. Refer to them whenever you call upon your Pyle regarding this
product.
Model No., _ _ _ _ _ _ _ _ _ _ _
Serial No. _ _ _ _ _ _ _ _ _ _ _ _
FOR CUSTOMERS IN THE UNITED STATES
This symbol is intended to
alert the user to the presence
of un-insulated "dangerous
voltage" within the
product's enclosure, it may
be of sufficient magnitude to
constitute a risk of electric
shock to persons.
CAUTION
CAUTION
RISK OF ELECTRIC SHOCK
DONOTOPEN
CAUTION: TO REDUCE THE
RISK OF ELECTRIC SHOCK.
DO NOT REMOVE COVER
(OR BACK). REFER
SERVICING TO QUALIFIED
SERVICE PERSONNEL.
This symbol is intended to
alert the user to the
presence of important
operating and maintenance
(servicing) instructions in
the literature
accompanying the
appliance.
You are cautioned that changes or modifications not expressly approved in this manual could
void your authority to operate this equipment.
To reduce the risk of fire or electric shock, do not expose this apparatus to min or
moisture.
To prevent fire, do not cover the ventilation of the appamtus with newspapers,
table-cloths, curtains and etc. Do not place lighted candles on the apparatus.
To prevent fire or shock hazard, do not place objects filled with liquid, such as vases,
on the apparatus.
Do not install the appliance in a confined space, such as a bookcase or built-in
cabinet.
Install this system so that the power cord can be unplugged from the wall socket
immediately in the event of trouble.
Batteries or batteries installed appamtus shall not be exposed to excessive heat such
as sunlight or fire.
Note to Home Theater System Installer:
This reminder is provided to call Home Theater System installers' attention to Article 820-40
of the NEC that provides guidelines for proper grounding, in particular, specifies that the
cable ground shall be connected to the grounding system of the building as close to the point
of cable entry as possible.

Advertisement

Table of Contents
loading

Table of Contents