Driver Assistance Systems Rear Vision; Camera (Rvc) - Chevrolet Spark 2014 Owner's Manual

9-32 Driving and Operating
Ending Cruise Control
There are four ways to end cruise
control:
Step lightly on the brake pedal
(manual and automatic
transmissions).
Press the clutch pedal to the
floor (manual transmissions).
Press on the steering wheel.
To turn off the cruise control,
press on the steering wheel.
Erasing Speed Memory
The cruise control set speed is
erased from memory by pressing
or if the ignition is turned off.
Driver Assistance
Systems
Rear Vision

Camera (RVC)

The vehicle may have an RVC
system. Read this entire section
before using it.
The RVC system can assist the
driver when backing up by
displaying a view of the area behind
the vehicle.
Warning
The RVC system does not display
children, pedestrians, bicyclists,
animals, or any other object
located outside the camera's field
of view, below the bumper,
or under the vehicle. Perceived
distances may be different from
actual distances. Do not back the
vehicle using only the RVC
Warning (Continued)
screen, during longer, higher
speed backing maneuvers,
or where there could be cross
traffic. Failure to use proper care
before backing may result in
injury, death, or vehicle damage.
Always check behind and around
the vehicle before backing.
How the System Works
When the vehicle is shifted into
R (Reverse), the image of the area
behind the vehicle appears in the
radio screen. The previous screen
displays when the vehicle is shifted
out of R (Reverse) after
approximately 2 seconds.
To see the previous screen sooner,
do one of the following:
Press a button on the
infotainment system.
Shift into P (Park).
(Continued)