2010 LCD unit
For access, remove these FRUs in order:
•
"1010 Battery pack" on page 58
•
"1020 Bottom slot cover" on page 58
•
"1040 Hard disk drive or solid-state drive assembly" on page 60
•
"1050 PCI Express Mini Card for wireless LAN" on page 62
•
"1060 Keyboard" on page 63
•
"1070 Keyboard bezel assembly" on page 66
• "1120 System board assembly, fan assembly, and coin-cell battery" on page 71
Removal steps of LCD unit
1
In step
, release the antenna cables from the cable guides.
When installing:
• Ensure that the cables are attached to the cable guides firmly.
• When you route the cables, ensure that they are not subject to any tension. Tension could cause the
cables to be damaged by the cable guides, or a wire to be broken.
76
Hardware Maintenance Manual
1
1
1
1
1
1
1
1
1
1