Topfield CBP-2001CI+ User Manual page 7

button switches the digital receiver between standby mode
and active mode.
? =
CHANNEL ,
vice. They are also used to navigate in menus and inter-
active screens.
light blinks every time you press a button on the remote
control.
STANDBY light lights up while the digital receiver is in standby
mode.
Front display shows the current time in standby mode, and
displays the current service in active mode.
There is a USB port on the front panel for firmware update and
data transfer. If you have an external hard drive connected to
the digital receiver via the USB port, you can record television
programmes into it.
1.2 Controlling the digital receiver 3
buttons switch to the previous or next ser-