Resetting To Factory Settings - Topfield CBP-2001CI+ User Manual

3.2 Resetting to factory settings

You should set the Search Mode option to Auto at the first
service search after installing the digital receiver. The digital
receiver will search all available services with the automatic
search mode.
To search only one frequency, set the Search Mode option to
Manual and specify your desired frequency at the Frequency
option with the numeric buttons.
Symbol Rate stands for data transfer rate, and QAM is a form
of modulation used in digital broadcasting. Broadcasting op-
erators send their services in a symbol rate by a modulation
method. Perhaps you do not have to specify the Symbol Rate
and QAM Mode options since they are seldom changed. You
can specify the Symbol Rate options with the numeric buttons
if you want to change them. In this case, you had better set
the Network Search option to On.
To start service search, move down to the Start Search item,
£
¢ ¡
and press the
OK
search for services and display a list of television and radio
services as they are found. It is common for no channels to be
found until quite late in the process. When the scan is com-
plete, you will see a message telling you how many services
have been found. Press the
The digital receiver maintains the following data:
• Services list
• Favourite list
• Timer list
• Preference settings
You can reset all data of the digital receiver. Select the Instal-
lation > System Recovery > Factory Setting menu, and then
you get asked for confirmation. With the choice of Yes, the
services list, favourite list and timer list will all be cleared, and
3.2 Resetting to factory settings 19
button. The digital receiver will start to
£
¢ ¡
button to save the list.
OK